|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
07-18-2020, 06:30 PM | #1 |
Senior Member
Join Date: Jun 2010
Location: Wilbraham MA
Posts: 151
|
Temperature sender
I am about to install a temperature sender in an aluminum head. The instructions say not to use Teflon tape because it could affect accuracy. Would anti-seize be OK? I’m concerned about the threads on removal if needed. Thanks, Dave
|
07-18-2020, 07:44 PM | #2 |
Member Emeritus
Join Date: Nov 2012
Location: Wichita KS
Posts: 16,132
|
Re: Temperature sender
The issue is the sender is a ground path for the gauge. The unit must have a good ground to the head to function, so any sealant much be conductive.
|
Sponsored Links (Register now to hide all advertisements) |
|
07-29-2020, 11:29 AM | #3 |
Senior Member
Join Date: Jun 2010
Location: Wilbraham MA
Posts: 151
|
Re: Temperature sender
Ok thanks
|
07-29-2020, 11:52 AM | #4 |
Senior Member
Join Date: May 2010
Location: Coral Springs FL
Posts: 10,944
|
Re: Temperature sender
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|