|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
03-26-2024, 01:02 PM | #1 |
Junior Member
Join Date: Mar 2024
Location: United Kingdom
Posts: 2
|
Model A Fuel Tank Tap outlet thread size???
I'm fitting a new original Ford style solid brass fuel tap as supplied by Mac's etc into the base of my 1929 model 'a' dash fuel tank. I am trying to find someone who can help tell me the thread size for the outlet of the tap itself not the tank!!! Any help would be great.
I am trying to identify it but could do with some expert advise.......... |
03-26-2024, 10:38 PM | #2 |
Senior Member
Join Date: May 2010
Location: PASADENA, CA
Posts: 1,885
|
Re: Model A Fuel Tank Tap outlet thread size???
DID NOT READ THE QUESTION CORRECTLY.
Chris W. Last edited by CWPASADENA; 03-26-2024 at 10:44 PM. |
Sponsored Links (Register now to hide all advertisements) |
|
03-26-2024, 11:26 PM | #3 |
Senior Member
Join Date: Jun 2014
Location: Melbourne, Australia
Posts: 7,496
|
Re: Model A Fuel Tank Tap outlet thread size???
The tap outlet is a flared fitting - the nut on it is 5/8"X18 TPI. (5/8 UNF.)
Hope that is what you need.
__________________
I'm part of the only ever generation with an analogue childhood and a digital adulthood. |
03-27-2024, 06:59 AM | #4 |
Junior Member
Join Date: Mar 2024
Location: United Kingdom
Posts: 2
|
Re: Model A Fuel Tank Tap outlet thread size???
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|