|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
12-30-2020, 08:10 AM | #1 |
Junior Member
Join Date: Dec 2014
Location: Hoover, Al
Posts: 12
|
1931 Pickup Build
Hi All, in process of assembling my late 31 pickup and hoping someone has some pictures or build thread of theirs they can share. At the moment I am installing wiring harness with column mounted turnsignal switch and unsure how the wiring should look or be fastened. How does main harness enter cab to connect with turn signal switch? Anyone have any pics or a thread to share so I can see how it should be done?
Thanks and appreciate any input. Brian |
12-30-2020, 09:31 AM | #2 | |
Senior Member
Join Date: May 2010
Location: Eastern Tennessee
Posts: 11,516
|
Re: 1931 Pickup Build
Quote:
|
|
Sponsored Links (Register now to hide all advertisements) |
|
12-30-2020, 11:45 AM | #3 |
Senior Member
|
Re: 1931 Pickup Build
Here are a couple of photos of my 31 PU. You can see the mount on the steering column. The flasher is mounted behind the drivers kick panel with the wiring going down and out into the engine compartment. From there the wires go up the column to the signal unit and down to the battery. In the second photo you can see the wire with the fuse just below the column going over to the ground on the starter.
Sorry for the dark pictures. |
12-30-2020, 04:38 PM | #4 |
Senior Member
Join Date: Sep 2016
Location: Roanoke, VA USA
Posts: 1,908
|
Re: 1931 Pickup Build
Sponsored Links (Register now to hide all advertisements)
Sent from my iPhone using Tapatalk |
|
|
Sponsored Links (Register now to hide all advertisements) |
|