|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
05-21-2020, 10:22 AM | #61 |
Senior Member
Join Date: May 2010
Location: southeastern Michigan
Posts: 10,101
|
Re: '32 standard roadster project - some further progress
Thanks for the compliment.
Theoretically, the windshield finger pulls on the phaeton and roadster windshield frame were painted black on the standard models, like the inside rear view mirror bracket. But, of the five standard phaetons and roadsters that I've owned, three had the chrome-plated deluxe finger pulls and as all still had their original windshield frames it is highly unlikely that the finger pulls were changed. |
05-21-2020, 01:56 PM | #62 |
Senior Member
Join Date: May 2010
Location: Basking Ridge, NJ
Posts: 590
|
Re: '32 standard roadster project - some further progress
Looked at this original, unmolested, B, STD, 1932 Ford roadster in 2008. The owner was nice enough to let me take a look at it even though it sold the night before. Seven years later I came across it as a reassembled car. Thank GOD the 1 800 Hot Rod guys didn't get their hands on it.
|
Sponsored Links (Register now to hide all advertisements) |
|
05-21-2020, 02:11 PM | #63 | |
Senior Member
Join Date: May 2015
Posts: 8,144
|
Re: '32 standard roadster project - some further progress
Quote:
__________________
The only thing nice about being imperfect is the joy it brings to others.... "Silver rings, your butt! Them's washers!" "We shot our way out of that town for a dollar's worth of steel holes!" - from 'The Wild Bunch' - 1969 https://www.youtube.com/watch?v=7NReUd2_0u0 |
|
05-21-2020, 04:17 PM | #64 |
Senior Member
Join Date: Jun 2012
Location: Long Island,NY
Posts: 1,555
|
Re: '32 standard roadster project - some further progress
It's refreshing to see a standard roadster. It seems like every '32 that came from the factory had dual side mounts. Just like the Model A roadsters when they were popular, everyone had dual side mounts and were painted Arabian Sand. Nice car Dave, I wouldn't rush, I doubt we are going to any shows this season. All of the shows I regularly attend have been canceled as far out as September, I'm keeping my fingers crossed for HERSHEY.
|
05-21-2020, 05:30 PM | #65 |
Senior Member
Join Date: May 2010
Location: southeastern Michigan
Posts: 10,101
|
Re: '32 standard roadster project - some further progress
The roadster in BoxCar Tom's photos is amazingly original and an important case study. I have dozens and dozens of photos of it inside and out which I refer to often.
Note the additional example of chrome plated finger pulls on the windshield frame which in theory should be black painted. |
05-21-2020, 05:54 PM | #66 | |
Senior Member
Join Date: May 2015
Posts: 8,144
|
Re: '32 standard roadster project - some further progress
Sponsored Links (Register now to hide all advertisements)
Quote:
__________________
The only thing nice about being imperfect is the joy it brings to others.... "Silver rings, your butt! Them's washers!" "We shot our way out of that town for a dollar's worth of steel holes!" - from 'The Wild Bunch' - 1969 https://www.youtube.com/watch?v=7NReUd2_0u0 |
|
05-21-2020, 06:40 PM | #67 |
Senior Member
Join Date: May 2010
Location: southeastern Michigan
Posts: 10,101
|
Re: '32 standard roadster project - some further progress
Nope, chrome over nickel. Keep in mind that was you see is the product of 80+ years of weathering.
|
05-21-2020, 11:33 PM | #68 |
Senior Member
Join Date: May 2010
Location: Basking Ridge, NJ
Posts: 590
|
Re: '32 standard roadster project - some further progress
Im surprised, no comment about the STD inside door handle escutcheons and door panels, and the dash is painted body color? The car was originally painted Brewster green but was over painted with flat black primer?
|
05-22-2020, 06:54 AM | #69 |
Senior Member
Join Date: May 2010
Location: southeastern Michigan
Posts: 10,101
|
Re: '32 standard roadster project - some further progress
The inside door handle escutcheons on the standard phaetons and roadsters were a unique shape, similar to one of the Model A versions, and originally painted brown. It is much simpler than the nickel-plated version used on the '32 deluxe models.
The standards also lacked door pockets as shown in the photo. The dark brown/black artificial leather upholstery material has, unfortunately, been nearly ripped off in its entirety. The body color dash is strange in that the engineering drawing specifies that it be painted 'interior gray', the same color as used on standard closed cars. Perhaps it was repainted way back when? The dashes on my other standard open cars all have evidence of having been originally painted 'interior gray'. As for the flat black primer, to me it is a bit of a sacrilege given that the original two-tone green wasn't in that bad a condition when this car first came out of hibernation in Maryland. |
05-22-2020, 08:44 AM | #70 |
Senior Member
Join Date: May 2010
Location: Basking Ridge, NJ
Posts: 590
|
Re: '32 standard roadster project - some further progress
Dave, All this chatter about std car details, Its been a while since this thread started, any more recent pictures? Completed car? Thanks, Tom
|
05-22-2020, 09:01 AM | #71 |
Senior Member
Join Date: May 2010
Location: southeastern Michigan
Posts: 10,101
|
Re: '32 standard roadster project - some further progress
Tom,
It should have been completed by now, but during 2018 and 2019 I was distracted by higher priorities and this year I am yet marooned 1,600 miles away from it. All the fenders and running boards are on it now along with the head lamp bar, so what's left is a very short list. No further photos, however. Hopefully it will be done later this year. Thanks for asking. Dave |
05-22-2020, 09:06 AM | #72 | |
Senior Member
Join Date: Oct 2011
Location: CT.
Posts: 596
|
Re: '32 standard roadster project - some further progress
Quote:
__________________
A man should do what he thinks best! "The Duke" |
|
05-25-2020, 12:35 PM | #73 |
Senior Member
Join Date: May 2010
Location: KC
Posts: 266
|
Re: '32 standard roadster project - some further progress
David Where did the cowl and grille lacing come from? The Vintique stuff flattens out over time and the hood fit changes too much. Thanks for all the help..!!
|
05-25-2020, 12:52 PM | #74 |
Senior Member
Join Date: May 2010
Location: southeastern Michigan
Posts: 10,101
|
Re: '32 standard roadster project - some further progress
The original type lacing with the hard, dark brown core came from A&L Parts Specialties in Canton, CT, but years ago. Evidently there were EPA issues with its manufacture and it is no longer available. I know that A&L persistently tried to find other sources for the hard core material without success. The soft white core welting sold today does flatten out over time from the weight of the hood plus the downward pressure exerted by the latches altering the hood fit, as you indicated.
|
05-26-2020, 09:14 AM | #75 | |
Senior Member
Join Date: May 2010
Location: Wisconsin, USA
Posts: 9,007
|
Re: '32 standard roadster project - some further progress
Quote:
__________________
"I can explain it for you. However, I can't understand it for you". |
|
05-27-2020, 04:22 AM | #76 | |
Senior Member
Join Date: May 2010
Location: KC
Posts: 266
|
Re: '32 standard roadster project - some further progress
Quote:
|
|
05-28-2020, 01:28 PM | #77 |
Senior Member
Join Date: May 2015
Posts: 8,144
|
Re: '32 standard roadster project - some further progress
Some good shots in this video > https://www.youtube.com/watch?v=NQHy0vHL5eQ&app=desktop
__________________
The only thing nice about being imperfect is the joy it brings to others.... "Silver rings, your butt! Them's washers!" "We shot our way out of that town for a dollar's worth of steel holes!" - from 'The Wild Bunch' - 1969 https://www.youtube.com/watch?v=7NReUd2_0u0 |
05-28-2020, 01:58 PM | #78 |
Senior Member
Join Date: May 2010
Location: southeastern Michigan
Posts: 10,101
|
Re: '32 standard roadster project - some further progress
Just about every model shown other than a standard open car and a convertible sedan.
The evidently unsold Model As are perhaps indicative of the economic hard times that existed, given that 1932 was the depth of the Depression. We now seeing some of those historic unemployment highs again for another reason. |
05-28-2020, 02:16 PM | #79 | |
Senior Member
Join Date: Mar 2014
Location: Jacksonville FL
Posts: 3,957
|
Re: '32 standard roadster project - some further progress
Quote:
ALSO interesting to me on the 32's is the "quality" of the reflections of the paint finishes........which make me wonder about people who make the comments of cars being "over restored"!!!! |
|
05-28-2020, 03:45 PM | #80 |
Senior Member
Join Date: May 2010
Location: southeastern Michigan
Posts: 10,101
|
Re: '32 standard roadster project - some further progress
Robert,
The finishes reflected what can be done with nitro lacquer, which is what Ford used on the bodies until the '33s in the U.S. (until the '34s in Canada). Commercial vehicle bodies weren't buffed out (except the deluxe panels, sedan deliveries, and station wagons) unless you paid extra. I know of no one restoring a '32 pickup, for example, who isn't paying for that option. It would be refreshing to see one turn up for judging with an unpolished finish, like the original pickup base vehicle. In the photo below from Ford's archives note the unpolished finish on the cabs of the trucks and the hood and bed of the pickup front and center (which appears to have been painted with three slightly different shades of the same color). The irony in the pickup's case is that it has the extra-cost pin striping option. The fenders, head lamps, and wheels have a high gloss finish as they were dipped in enamel. |
|
|
Sponsored Links (Register now to hide all advertisements) |
|