Quote:
Originally Posted by modelanut
Thank you. The first picture from Chris Haynes shows the two eccentrics about 2/3 of the way up on the backing plate but the parts blowup does not. I will call the references. I appreciate the help. It's time to get my high school ride moving again.
|
They are not shown as they part of the backing plates and serviced separately.
Only way to get the cams is to salvage them off another plate; or switch plates.
Only one bad I would fix it; but if both are twisted off; I would probably replace the plate, unless the existing plate was powder coated or plated.
They are in the parts blowup tho; circled them.