Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 06-11-2021, 08:21 PM   #81
sugarmaker
Senior Member
 
sugarmaker's Avatar
 
Join Date: Dec 2016
Location: Albion PA
Posts: 1,665
Default Re: 1932 The Deuce, Dually, Dump Truck

Quote:
Originally Posted by tubman View Post
I don't care what anyone says; that is in NICE shape!
Tubman,
Thanks for the comments! Man I am trying to learn a whole new language.
I repaired the left front hood latch last night so that the knob on the spring would not pull through. It was worn. I was very surprised that the nuts on the screws loosened and I was able to remove it and gently close up the worn slot by moving the metal on both sides closer. Minor enlargement of the screw holes so the bolt pattern would align with the car. This could have fallen off on a road trip or been easily lost. Not a expert on any of these items but years of doing other refurb work, gives me some skills to correct and repair items if at all possible.

One thing I kind of like on a unit that your not going to strip and paint is that the time to fix this one item was maybe a hour. but required no real clean up or paint. Original hardware went right back in after cleaning the threads and apply a little lube.

Regards,
Chris
sugarmaker is offline   Reply With Quote
Old 06-11-2021, 08:37 PM   #82
tubman
Senior Member
 
tubman's Avatar
 
Join Date: Dec 2013
Location: Minnesota, Florida Keys
Posts: 10,247
Default Re: 1932 The Deuce, Dually, Dump Truck

I can't help myself; here is a picture of a "deuce, dually ... truck" I found (it is European).
Attached Images
File Type: jpg konings-twin.jpg (44.2 KB, 94 views)
tubman is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 06-11-2021, 09:01 PM   #83
Floyd
Senior Member
 
Join Date: May 2010
Posts: 468
Default Re: 1932 The Deuce, Dually, Dump Truck

My comment about "new-old" seat cover would be to find some period correct for the truck material and use that IF you cannot find old correct material that is somewhat worn but not worn out. I agree that worn out/torn/ ripped/ stained material is not acceptable. You want it to look nice and inviting but somewhat lived in to go with the patina of the truck. This might be the hardest part to getting the truck show ready.
Be brave and give him a good bath. Then you will be done with the exterior "restoration"!
Floyd is offline   Reply With Quote
Old 06-11-2021, 10:23 PM   #84
sugarmaker
Senior Member
 
sugarmaker's Avatar
 
Join Date: Dec 2016
Location: Albion PA
Posts: 1,665
Default Re: 1932 The Deuce, Dually, Dump Truck

Quote:
Originally Posted by tubman View Post
I can't help myself; here is a picture of a "deuce, dually ... truck" I found (it is European).
tubman,
Ok that was not what I was expecting! Someone had way to much time on there hands that summer! Wow! I can see some similarities!
Regards,
Chris
sugarmaker is offline   Reply With Quote
Old 06-11-2021, 10:25 PM   #85
sugarmaker
Senior Member
 
sugarmaker's Avatar
 
Join Date: Dec 2016
Location: Albion PA
Posts: 1,665
Default Re: 1932 The Deuce, Dually, Dump Truck

Quote:
Originally Posted by Floyd View Post
My comment about "new-old" seat cover would be to find some period correct for the truck material and use that IF you cannot find old correct material that is somewhat worn but not worn out. I agree that worn out/torn/ ripped/ stained material is not acceptable. You want it to look nice and inviting but somewhat lived in to go with the patina of the truck. This might be the hardest part to getting the truck show ready.
Be brave and give him a good bath. Then you will be done with the exterior "restoration"!
Floyd,
I think your right on the money here at least with my way of thinking. I want it nice enough anyone could climb in and be somewhat comfortable.
Regards,
Chris
sugarmaker is offline   Reply With Quote
Old 06-11-2021, 10:40 PM   #86
Bob C
Senior Member
 
Join Date: May 2010
Location: So Cal
Posts: 8,697
Default Re: 1932 The Deuce, Dually, Dump Truck

Sponsored Links (Register now to hide all advertisements)
Snyders has new seat springs S-806 and S-807.
https://www.snydersantiqueauto.com/S...ord?word=s-806
Bob C is offline   Reply With Quote
Old 06-11-2021, 11:16 PM   #87
sugarmaker
Senior Member
 
sugarmaker's Avatar
 
Join Date: Dec 2016
Location: Albion PA
Posts: 1,665
Default Re: 1932 The Deuce, Dually, Dump Truck

Folks,
Random pictures:
Straightened the louvers this side:


Reverse lock out:


Right side engine for David:










Door checks missing:


Start cable (needs work)






Map holder??


Behind rear seat crusty but there:




Light switch:


mirror:




Found this in my tool cabinet have had for many years I tred it and it works for water pump.


Door damage and new old handle installed:




Regards,
Chris
sugarmaker is offline   Reply With Quote
Old 06-11-2021, 11:16 PM   #88
sugarmaker
Senior Member
 
sugarmaker's Avatar
 
Join Date: Dec 2016
Location: Albion PA
Posts: 1,665
Default Re: 1932 The Deuce, Dually, Dump Truck

Some more:
Good luck key fob. Not sure what position key comes out?? Sorry not good picture!


Hub cap:


Into the brakes: Steel from the pedal to the wheel!:










Regards,
Chris
sugarmaker is offline   Reply With Quote
Old 06-12-2021, 07:22 AM   #89
jimTN
Senior Member
 
Join Date: May 2010
Location: Powell, TN
Posts: 2,500
Default Re: 1932 The Deuce, Dually, Dump Truck

Woven linings are better than molded linings and those look good. You have lots of "correct" stuff on that truck.
jimTN is offline   Reply With Quote
Old 06-12-2021, 07:40 AM   #90
hd1937
Junior Member
 
hd1937's Avatar
 
Join Date: Nov 2011
Location: NW PA
Posts: 11
Default Re: 1932 The Deuce, Dually, Dump Truck

Chris,
Many tire options available, here’s just one.

Jim

https://www.millertire.com/6-00-20-f...py-truck-tire/
__________________
1930 Model A Doodlebug
Now a Doodletug!
hd1937 is offline   Reply With Quote
Old 06-12-2021, 08:45 AM   #91
Zeke3
Senior Member
 
Zeke3's Avatar
 
Join Date: Dec 2014
Location: Columbus, IN
Posts: 1,399
Default Re: 1932 The Deuce, Dually, Dump Truck

That is a great looking, original truck. It would be good to treat the areas where there were mouse nests with Ospho or some other rust neutralizing product.
Zeke3 is offline   Reply With Quote
Old 06-12-2021, 09:23 AM   #92
DavidG
Senior Member
 
DavidG's Avatar
 
Join Date: May 2010
Location: southeastern Michigan
Posts: 10,056
Default Re: 1932 The Deuce, Dually, Dump Truck

As jimTN noted, lots of original, correct, stuff on your truck.
DavidG is offline   Reply With Quote
Old 06-12-2021, 08:41 PM   #93
sugarmaker
Senior Member
 
sugarmaker's Avatar
 
Join Date: Dec 2016
Location: Albion PA
Posts: 1,665
Default Re: 1932 The Deuce, Dually, Dump Truck

Ford folks,
Thanks guys For the brake info. So could these be used as is? I took the clevis off this brake rod and the bottom mechanism moves down and moves the shoes out.

Havent touched the 32 today. Helped at our local tractor show grounds.
As I cleaned up the outer wheel bearing, I can see FORD script on the inner race!

Random stuff:


Regards,
Chris
sugarmaker is offline   Reply With Quote
Old 06-12-2021, 08:47 PM   #94
sugarmaker
Senior Member
 
sugarmaker's Avatar
 
Join Date: Dec 2016
Location: Albion PA
Posts: 1,665
Default Re: 1932 The Deuce, Dually, Dump Truck

Quote:
Originally Posted by hd1937 View Post
Chris,
Many tire options available, here’s just one.

Jim

https://www.millertire.com/6-00-20-f...py-truck-tire/

Jim,
Thanks, They (Miller) are in Wauseon! We could load up your Doodle Tug and Bug and head out for the show and pick up tires, tubes and flaps for the 32! I think it may be a big Allis show??
Regards,
Chris
sugarmaker is offline   Reply With Quote
Old 06-12-2021, 08:50 PM   #95
sugarmaker
Senior Member
 
sugarmaker's Avatar
 
Join Date: Dec 2016
Location: Albion PA
Posts: 1,665
Default Re: 1932 The Deuce, Dually, Dump Truck

Quote:
Originally Posted by Bob C View Post
Snyders has new seat springs S-806 and S-807.
https://www.snydersantiqueauto.com/S...ord?word=s-806
Bob,
I saw those for like $150 or less that might be the right way to get the correct units. Then I would need to make the wood bases?? Or do the bases come withe them? I may try to call them Monday.
Getting all three spring units new might be the way to go. The back has been whipped on pretty hard also, and the spring assembly needs repairs.
Regards,
Chris

Last edited by sugarmaker; 06-12-2021 at 08:56 PM.
sugarmaker is offline   Reply With Quote
Old 06-13-2021, 06:32 AM   #96
jimTN
Senior Member
 
Join Date: May 2010
Location: Powell, TN
Posts: 2,500
Default Re: 1932 The Deuce, Dually, Dump Truck

This should go without saying but if you are not familiar with truck rims, when those tires are mounted, they should be in a cage when inflated and a clamp on inflater used. Clean those woven linings with a commercial brake cleaning spray. Also use a covid mask when working on those brakes because they are most likely asbestos.
jimTN is offline   Reply With Quote
Old 06-13-2021, 12:45 PM   #97
sugarmaker
Senior Member
 
sugarmaker's Avatar
 
Join Date: Dec 2016
Location: Albion PA
Posts: 1,665
Default Re: 1932 The Deuce, Dually, Dump Truck

JimTN, Folks,
Thanks for the reminders I do understand the safety aspects of the split rims. They are at a tire shop and they have the cage to re assemble these.
Glad I was setting down last night as I got the prices of the 6,00-20 Firestone tires, tubes and flaps. Just about $300 per wheel for the new rubber. & are on the list on the list.
The linings on this one brake system, I did spray down with brake clean. I will not fuss with the Asbestos shoe material with out a mask. Thanks for the reminder.
Ok, So I have a plan for seats, tires and brakes. Total cost would be about $3k. So like most things this will stretch over some time to allow some funds to be available.
I have done several tractors and other things and there usually is plenty to do to be ready to spend money. I also still need to get the books David G recommended.
Then the engine. Well I did pick up new spark plugs at NAPA. Beyond that I will start to look at basic items and systems. Fuel, Ignition, compression, and timing! Fluids and tuneup would be on the list too.
Way much to learn on this truck! But on the other hand these are very similar to the 4 cyl tractors I have been working on for 6-7 years. I like the simplicity.

Thanks for checking in on me! Hope things are good in FORD land!
Regards,
Chris
sugarmaker is offline   Reply With Quote
Old 06-13-2021, 01:23 PM   #98
Floyd
Senior Member
 
Join Date: May 2010
Posts: 468
Default Re: 1932 The Deuce, Dually, Dump Truck

A set of NOS seat springs would be great but probably not going to happen. Snyder's is the go-to for springs. Their new ones will fit and work just fine. Old spring sets are broken and worn out and in most cases not worth messing with.
As to the brakes, the way to make them perfect is to check each and every clevis , pin and rod hole. You will find them with some or a lot of play. When you add up all the links that are in series you get a lot of slop and the brakes will never be acceptable. The solution is to buy the oversize pins from one of the good vendors (you want hardened pins) and fit them. the clevis's will be OK but you may find some of the rod holes worn too big. These can be welded up or look for good Ford rods to replace. The bushings in the cross shaft assembly will be shot and need to be dealt with. I am not familiar with the pieces for big trucks but you can probably find (with Fordbarn help) the cams, links and pins for the mechanisms in the backing plates. None of this is expensive but will take time to do and when done (perfectly) you will have "new truck" brakes. No shortcuts allowed or you will defeat the whole process. I know that perfectly done brakes on a '32 car will stop as good as any system.
I am still curious about who will be the hero that shows up with correct seat upholstery material. The new springs with quality padding will make for a comfy ride.
Floyd is offline   Reply With Quote
Old 06-13-2021, 06:53 PM   #99
38Coupe
Junior Member
 
Join Date: Jun 2021
Location: Pittsburgh, PA
Posts: 15
Default Re: 1932 The Deuce, Dually, Dump Truck

Nice truck! Congrats!
38Coupe is offline   Reply With Quote
Old 06-13-2021, 09:51 PM   #100
DavidG
Senior Member
 
DavidG's Avatar
 
Join Date: May 2010
Location: southeastern Michigan
Posts: 10,056
Default Re: 1932 The Deuce, Dually, Dump Truck

Chris,


You should be able to withdraw the key in the full clockwise position which occurs when the steering column shaft is locked in place.
DavidG is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 12:35 AM.