Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 03-03-2021, 07:44 PM   #21
JSeery
Member Emeritus
 
JSeery's Avatar
 
Join Date: Nov 2012
Location: Wichita KS
Posts: 16,132
Default Re: Clayborne Update !!!

Quote:
Originally Posted by KR500 View Post
Hopefully they will show. All high resolution so had to reduce the MB size
Yes you did! They are all in the 50kb range now.
JSeery is offline   Reply With Quote
Old 03-03-2021, 08:21 PM   #22
KR500
Senior Member
 
KR500's Avatar
 
Join Date: Mar 2012
Location: Addison,ll.
Posts: 451
Default Re: Clayborne Update !!!

Those pics were taken from the booklet put out by Ford to solicit businesses that wanted to get into the Ford Parts Reconditioning end. Booklet is from 1943 and is 100 pages of all the K.R. Wilson tools that were used in rebuilding fuel pumps, carburetors, engines, and distributors.
KR500 is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 03-04-2021, 12:04 AM   #23
JSeery
Member Emeritus
 
JSeery's Avatar
 
Join Date: Nov 2012
Location: Wichita KS
Posts: 16,132
Default Re: Clayborne Update !!!

I know, I have posted the same photos a few weeks back, LOL. Interesting manual.
JSeery is offline   Reply With Quote
Old 01-15-2022, 10:28 AM   #24
deuce5wndw
Senior Member
 
deuce5wndw's Avatar
 
Join Date: May 2010
Location: Liberty, KY
Posts: 892
Default Re: Clayborne Update !!!

Bringing up this old thread but I still need the attachments. Any news?
Thanks, Dale.
deuce5wndw is offline   Reply With Quote
Old 01-16-2022, 05:54 AM   #25
GaryU.
Senior Member
 
GaryU.'s Avatar
 
Join Date: May 2010
Location: Beaver Dam, Wisconsin
Posts: 821
Default Re: Clayborne Update !!!

Very sorry that it's dead on my end. When more than one business gives quotes and timelines and never comes through it is indeed a sad time for us all. The biggest problem seemed to be scarcity of materials needed to make these, the pipe for the ring portion is the sticking point.
GaryU. is offline   Reply With Quote
Old 01-16-2022, 11:55 AM   #26
deuce5wndw
Senior Member
 
deuce5wndw's Avatar
 
Join Date: May 2010
Location: Liberty, KY
Posts: 892
Default Re: Clayborne Update !!!

Sponsored Links (Register now to hide all advertisements)
Sad indeed! Thank you for your efforts Gary!
Regards, Dale.
deuce5wndw is offline   Reply With Quote
Old 01-16-2022, 02:13 PM   #27
Elmo Rodge
Senior Member
 
Elmo Rodge's Avatar
 
Join Date: May 2010
Location: Salina, Utah
Posts: 322
Default Re: Clayborne Update !!!

Can that ring not be rolled from flat stock?
Wayno
__________________
Life is not a spectator sport.
Elmo Rodge is offline   Reply With Quote
Old 01-16-2022, 04:46 PM   #28
Newc
Senior Member
 
Newc's Avatar
 
Join Date: May 2010
Posts: 2,446
Default Re: Clayborne Update !!!

I have a stand similar to a Clayborn, but it seems to be 4 cyl set up. designed to hold by the pan rail. Newc
Newc is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 09:09 PM.