|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
08-07-2020, 08:42 PM | #1 |
Junior Member
Join Date: Aug 2020
Posts: 1
|
Radius rod ball cap bolts replacement
Hello,
Does anyone know of an easier way to replace the bolts that hold the rod cap together other than pulling the motor? One of mine is slightly stripped and the nut wont thread. So I bought a kit and just planning. Thanks in advance! |
08-07-2020, 09:13 PM | #2 |
Senior Member
Join Date: May 2010
Location: Oregon
Posts: 5,963
|
Re: Radius rod ball cap bolts replacement
You can replace them from under the car. pull the pin and push up then rock them out of the hole. You can use a piece of soft wire to help in putting/guiding the new ones in. A good light helps. If the bore for the bolts is worn you can add a washer or a few under the bolt head to raise it some.
|
Sponsored Links (Register now to hide all advertisements) |
|
08-08-2020, 02:38 AM | #3 | |
Senior Member
Join Date: Mar 2017
Location: southern California
Posts: 725
|
Re: Radius rod ball cap bolts replacement
Sponsored Links (Register now to hide all advertisements)
Quote:
|
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|