|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
09-20-2019, 07:09 PM | #1 |
Senior Member
Join Date: May 2010
Location: Walker Lake, Nevada
Posts: 304
|
How to measure front wheels to straight ahead
I want to mount my steering wheel in the X position with my "suicide knob" at 2 o'clock. What is a good way to determine when the front wheels are in the straight ahead position? I have a 1929 Coupe with the splined shaft.
|
09-20-2019, 07:14 PM | #2 |
Senior Member
Join Date: May 2010
Location: on the Littlefield
Posts: 6,163
|
Re: How to measure front wheels to straight ahead
When you go for a drive make note of the steering wheel position
If you can't drive it take someone long and straight and lay it against the side of the tires, get so both fronts are equal Stand back and take a sight look down across the tires, make equal The front wheels should be a little closer at the front ( toe in ) |
Sponsored Links (Register now to hide all advertisements) |
|
09-20-2019, 07:28 PM | #3 |
Senior Member
Join Date: May 2010
Location: Walker Lake, Nevada
Posts: 304
|
Re: How to measure front wheels to straight ahead
Thanks! I can't drive the car yet, so I will find something long and straigt and go from there.
|
09-20-2019, 11:35 PM | #4 |
Senior Member
Join Date: May 2010
Location: Santee, California
Posts: 3,505
|
Re: How to measure front wheels to straight ahead
Basically, you cant. The toe in spec is too tight for any crude method. Get it to an alignment shop.
|
09-21-2019, 09:15 AM | #5 |
Senior Member
Join Date: May 2010
Location: Walker Lake, Nevada
Posts: 304
|
Re: How to measure front wheels to straight ahead
The nearest alignment shop is more than 70 miles away. I will have to use a crude method until the car is safe to drive. The longest trip my car had was 13 miles to town and back, ten years ago. One step at a time. Always something to fix or adjust. At 71 I am learning more each day, and I love it.
|
09-21-2019, 04:50 PM | #6 |
Senior Member
Join Date: Jun 2015
Posts: 1,414
|
Re: How to measure front wheels to straight ahead
Sponsored Links (Register now to hide all advertisements)
|
09-21-2019, 05:15 PM | #7 |
Senior Member
Join Date: May 2010
Location: Alabama
Posts: 8,099
|
Re: How to measure front wheels to straight ahead
The front of the wheels must towed in 1/16 closer than the back of the front wheels . With the wheels adjusted closer at the front keeps the wheels going in a straight line . If the front end isn't towed in correctly it will wander and if towed out the least fraction it can cause shimmy or death wobble . Setting the toe in can be a pain . I prefer having the toe in set at a front end alignment shop .
|
09-22-2019, 03:17 AM | #8 |
Senior Member
Join Date: May 2010
Location: Largo Florida
Posts: 7,225
|
Re: How to measure front wheels to straight ahead
Which is your concern, the wheels/tires pointing in the straight ahead position for steering wheel alignment, or, toe-in setting ?
It sounds to me like you just want the steering wheel straight ahead for now. |
09-22-2019, 07:54 PM | #9 |
Senior Member
Join Date: May 2010
Location: Innisfil, Ontario Canada
Posts: 1,174
|
Re: How to measure front wheels to straight ahead
Here's a trick to check the placement of the front and rear wheels to each other in a straight line. Get about 12' of elastic thread and attach a fish hook or safety pin opened up on each end. Then at centre wheel height hook the thread to the inside or the tire and bring it around to the outside, then down the side of the car to the rear tire at the centre and hook the elastic on the inside of the tire. If the front and rear wheels are in alignment the thread will touch the front and rear of each tire. With no gaps. This will also tell you that there's "Zero" toe. Hope this is clear enough. JP
|
09-23-2019, 04:14 AM | #10 |
Senior Member
Join Date: May 2010
Location: Gwynn's Island Va
Posts: 1,406
|
Re: How to measure front wheels to straight ahead
Unhook the steering arm from the box. Rotate steering wheel right and left (lock to lock) count the turns
Of the wheel. If the # is 4 total then 2 turns from lock is the center. This is called clocking the wheel. Install wheel where you want it. Now line up/adjust front wheels to the steering arm. Wick |
09-23-2019, 07:52 PM | #11 |
Senior Member
Join Date: Jan 2011
Location: Palmyra, NJ
Posts: 475
|
Re: How to measure front wheels to straight ahead
I was given this tool suggestion and it seems to work pretty well at least to get you in the ball park so you could go to an alignment shop. I use two Harbor Freight tape measures as part of the tool kit. This was in one of the national club magazines but I don't know which one.
Good luck, Supergnat |
|
|
Sponsored Links (Register now to hide all advertisements) |
|