The Ford Barn

decling · 07-08-2022, 07:22 PM

Is it possible to buy the windshield frame bottom brackets that hook to the windshield crank regulator or do I need to start searching for originals?

Tinker · 07-08-2022, 08:59 PM

If you can source it from old parts. I'd look there. Lot of options to get used parts now.

OldDad · 07-09-2022, 12:22 AM

If you find them, I'd like to see them. I made a pair from a couple of steel hinges, cut down and rolled over a bit. Not too pretty, but functional for the time being.

Tinker · 07-09-2022, 12:29 AM

Well no one said this was a easy hobby. Took me 7 yrs to find a nice grill surround chrome for my 38 truck. It happens.

do what you can till you have what you need.

I know these guys have a few 38's. not sure they will cut up a truck for the part.
http://www.dansoldcars.net/

38bill · 07-09-2022, 11:17 AM

Probably need to find a complete regulator that still has the brackets. They show up on ebay every now and then. Just make sure the hinged brackets are still on the reg.

https://www.ebay.com/itm/28489032031...YAAOSw25FiyY1J

marko39 · 07-09-2022, 11:47 AM

Sponsored Links (Register now to hide all advertisements)

You may have better luck finding them if you knew what other vehicles used the same ones.

07-08-2022, 07:22 PM	#1
decling Senior Member Join Date: Oct 2020 Location: Arizona Posts: 103	1938 Truck Windshield Frame parts Is it possible to buy the windshield frame bottom brackets that hook to the windshield crank regulator or do I need to start searching for originals? Last edited by decling; 07-08-2022 at 07:31 PM. Reason: word choice

07-08-2022, 08:59 PM	#2
Tinker Senior Member Join Date: May 2010 Location: MN Posts: 7,053	Re: 1938 Truck Windshield Frame parts If you can source it from old parts. I'd look there. Lot of options to get used parts now.

07-09-2022, 12:22 AM	#3
OldDad Senior Member Join Date: Oct 2010 Location: Pasadena, CA Posts: 152	Re: 1938 Truck Windshield Frame parts If you find them, I'd like to see them. I made a pair from a couple of steel hinges, cut down and rolled over a bit. Not too pretty, but functional for the time being.

07-09-2022, 12:29 AM	#4
Tinker Senior Member Join Date: May 2010 Location: MN Posts: 7,053	Re: 1938 Truck Windshield Frame parts Well no one said this was a easy hobby. Took me 7 yrs to find a nice grill surround chrome for my 38 truck. It happens. do what you can till you have what you need. I know these guys have a few 38's. not sure they will cut up a truck for the part. http://www.dansoldcars.net/ Last edited by Tinker; 07-09-2022 at 12:41 AM.

07-09-2022, 11:17 AM	#5
38bill Senior Member Join Date: Apr 2014 Location: Minnesota Posts: 1,166	Re: 1938 Truck Windshield Frame parts Probably need to find a complete regulator that still has the brackets. They show up on ebay every now and then. Just make sure the hinged brackets are still on the reg. https://www.ebay.com/itm/28489032031...YAAOSw25FiyY1J

07-09-2022, 11:47 AM	#6
marko39 Senior Member Join Date: Oct 2016 Location: harpursville ny Posts: 1,040	Re: 1938 Truck Windshield Frame parts Sponsored Links (Register now to hide all advertisements) You may have better luck finding them if you knew what other vehicles used the same ones.