|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
02-02-2020, 03:06 PM | #1 |
Senior Member
Join Date: Sep 2019
Location: Savannah, Ga
Posts: 225
|
8ba v8 oil pressure sender
I have an oil leak at the point on the 8ba block where the line TO the oil filter attaches to the block. This is at a right angle to, and is located just below the oil pressure sender. Since it is in a very difficult to reach spot, I wanted to ask for information on the thread pitch? I don't want to cause bigger issues by using an improper thread size and pitch. Any help would be greatly appreciated. Thank you.
|
02-02-2020, 03:14 PM | #2 |
Senior Member
Join Date: Oct 2016
Location: harpursville ny
Posts: 1,040
|
Re: 8ba v8 oil pressure sender
Should be 1/4 inch pipe thread.
|
Sponsored Links (Register now to hide all advertisements) |
|
02-02-2020, 03:41 PM | #3 |
Senior Member
Join Date: May 2010
Location: Oshkosh, Wi
Posts: 4,526
|
Re: 8ba v8 oil pressure sender
Yup
|
02-02-2020, 05:10 PM | #4 |
Senior Member
Join Date: Sep 2019
Location: Savannah, Ga
Posts: 225
|
Re: 8ba v8 oil pressure sender
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|