|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
10-06-2013, 09:13 AM | #1 |
Member
Join Date: Oct 2010
Location: Ridgefield Washington
Posts: 87
|
manifold gasket
I'm replacing copper manifold gasket, it appears slightly different side to side due to the way it's made. Does it matter which side goes against the block? Thanks in advance.
|
10-06-2013, 09:16 AM | #2 |
Senior Member
Join Date: May 2010
Location: capemaynewjersey
Posts: 653
|
Re: manifold gasket
usally there soe mark of soe kind saying so.
|
Sponsored Links (Register now to hide all advertisements) |
|
10-06-2013, 09:31 AM | #3 |
Senior Member
Join Date: Jul 2012
Location: Pensacola Fl
Posts: 305
|
Re: manifold gasket
huh?
__________________
Gene USN |
10-06-2013, 11:23 AM | #4 |
Senior Member
Join Date: Jul 2010
Location: United Kingdom
Posts: 1,444
|
Re: manifold gasket
If not marked and fits either way round then either way is OK! If it has a crimped face ( like some head gaskets) then it mike be wise to have the crimp facing the manifold - if it indents the manifold it's easier to machine that flat than the engine, ( but that's small print stuff.)
|
10-06-2013, 10:51 PM | #5 | |
Senior Member
Join Date: Dec 2010
Location: FRESNO, CA
Posts: 12,560
|
Re: manifold gasket
Sponsored Links (Register now to hide all advertisements)
Quote:
Greg asked, "Which way"? when he put in my copper gaskets. "Put 1 in one way & one in the other way & we'll see which one "blows" out first" Bill W.
__________________
"THE ASSISTANT GURU OF STUFF" |
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|