|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
06-04-2021, 12:35 PM | #1 |
Member
Join Date: Jun 2019
Posts: 38
|
52 F1 Clutch/Brake pedal bushings
The bushings for the pedals seem to be worn out. I bought new bushings but I am having trouble removing the rivet that holds the assembly together.
The opposite end of the rivet has some sort of waffle pattern in it. When I try to drive it thru it goes a little bit and stops. Any suggestions as to what I'm doing wrong? |
06-04-2021, 01:47 PM | #2 |
Senior Member
Join Date: May 2010
Location: new britain,ct 06052
Posts: 9,390
|
Re: 52 F1 Clutch/Brake pedal bushings
Maybe try drilling it out?? Heat??
Paul in CT |
Sponsored Links (Register now to hide all advertisements) |
|
06-04-2021, 02:02 PM | #3 |
Senior Member
Join Date: May 2010
Location: upstate SC
Posts: 2,964
|
Re: 52 F1 Clutch/Brake pedal bushings
grind off the waffle pattern and then drive out
|
06-04-2021, 08:57 PM | #4 |
Member Emeritus
Join Date: Nov 2012
Location: Wichita KS
Posts: 16,132
|
Re: 52 F1 Clutch/Brake pedal bushings
They are staked in place, they do not come out easy. Grind it down and go to work on it.
|
06-05-2021, 12:26 AM | #5 | |
Senior Member
Join Date: May 2010
Location: East Shore of LAKE HOUSTON
Posts: 11,114
|
Re: 52 F1 Clutch/Brake pedal bushings
Quote:
In addition to all of the above suggestions, I always use a pneumatic hammer to zip 'em right out. DD |
|
06-05-2021, 08:54 PM | #6 |
Junior Member
Join Date: Jan 2012
Location: Sharpsburg, GA
Posts: 2
|
Re: 52 F1 Clutch/Brake pedal bushings
Sponsored Links (Register now to hide all advertisements)
|
06-05-2021, 10:08 PM | #7 |
Member Emeritus
Join Date: Nov 2012
Location: Wichita KS
Posts: 16,132
|
Re: 52 F1 Clutch/Brake pedal bushings
I would call Michael at 3rd generation.
|
06-07-2021, 10:50 AM | #8 |
Member
Join Date: Jun 2019
Posts: 38
|
Re: 52 F1 Clutch/Brake pedal bushings
McMaster sells the rivets.
|
06-07-2021, 04:36 PM | #9 |
Senior Member
Join Date: Oct 2015
Location: Socal
Posts: 795
|
Re: 52 F1 Clutch/Brake pedal bushings
Another one of those jobs. I didn't see anything holding the pedal shaft from coming out....... so I put it in the press and sheared the pin/rivet thing when pressing it apart.
Ended up machining another pin/rivet. |
|
|
Sponsored Links (Register now to hide all advertisements) |
|