|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
10-02-2020, 12:36 AM | #11 |
Senior Member
Join Date: May 2010
Location: Santee, California
Posts: 3,505
|
Re: Question on Cam Gear Marks - UPDATE
Mart, after further scrutiny of number 6 with 1 at TDC, i think both valves are closed. if any valve is off the seat, I cant really see it. Rocking the crank back and forth opens and closes both valves in opposition.
Brian, I've had the heads off this thing three times. In the past I have never had to do that even once. It would be my very last ditch effort to do it again. Can the cam be degreed without removing the heads? Last edited by Russ/40; 10-02-2020 at 01:50 PM. |
|
|
Sponsored Links (Register now to hide all advertisements) |
|