The Ford Barn

Tony, NY · 09-24-2017, 03:34 PM

Quote:

Originally Posted by RalphM

I thought if heating and straightening it, but didn't want to weaken it at the tip, or heat the rod enough to cause the seal to leak.

Pull the rod out and wrap it with wet rags. Heat about an inch and straighten it out.

Lawson Cox · 09-24-2017, 04:58 PM

Sounds moderately interesting. Can someone post a picture of one mounted on a 35 or 36?

Talkwrench · 09-24-2017, 10:07 PM

Just use a VW one would be cheap in the US, make your own mounts. Don't use to cover a problem, it's good insurance.
Lawson here's the one I made for my 35 pickup.

j32 · 09-25-2017, 08:51 AM

Are you attaching these to the tie rod or drag link?

09-24-2017, 04:58 PM	#22
Lawson Cox Senior Member Join Date: May 2010 Location: Above the gnat line in Georgia Posts: 7,009	Re: Steering damper Sounds moderately interesting. Can someone post a picture of one mounted on a 35 or 36? __________________ Life is like a roll of toilet paper. The closer to the end, the faster it goes. It is better to be seen, than viewed. "We sleep safe in our beds because rough men stand ready in the night to visit violence on those who would do us harm".

09-25-2017, 08:51 AM	#24
j32 Member Join Date: Oct 2010 Location: Castleton.ny Posts: 40	Re: Steering damper Are you attaching these to the tie rod or drag link?