|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
03-07-2020, 12:44 PM | #1 |
Senior Member
Join Date: May 2010
Location: San Diego,Ca
Posts: 1,377
|
Oil filter Question
I have a oil filter mount that fits on the timing cover, the filter stud is 3/4, I am looking for a stud that is 3/4 to 13/16 to mount the filter which is 13/16, any know where I may find one, Thanks.
__________________
Nothing can be made foolproof, ---- fools are ingenious bastards. |
03-07-2020, 12:52 PM | #2 |
Senior Member
Join Date: Jun 2010
Location: Temecula, CA
Posts: 4,087
|
Re: Oil filter Question
Try a different filter.
|
Sponsored Links (Register now to hide all advertisements) |
|
03-08-2020, 12:20 AM | #3 |
Senior Member
Join Date: May 2010
Posts: 2,595
|
Re: Oil filter Question
hwīˈevə(r)
Last edited by Benson; 03-08-2020 at 01:55 PM. |
03-08-2020, 06:21 PM | #4 |
Senior Member
Join Date: May 2010
Location: San Diego,Ca
Posts: 1,377
|
Re: Oil filter Question
Yes I got that sorted out, I was looking for the small stubby filters, should I refit my Vortex manifold, which needs clearance with the front carb and filter, the filter specs do not always quote the thread size, anyhow there are plenty of filters to pick from without replacing the stud.
Thanks Jim stay well.
__________________
Nothing can be made foolproof, ---- fools are ingenious bastards. |
03-08-2020, 06:22 PM | #5 |
Senior Member
Join Date: May 2010
Location: San Diego,Ca
Posts: 1,377
|
Re: Oil filter Question
Sponsored Links (Register now to hide all advertisements)
__________________
Nothing can be made foolproof, ---- fools are ingenious bastards. |
|
|
Sponsored Links (Register now to hide all advertisements) |
|