The Ford Barn

bobsmanstuff · 04-25-2021, 07:47 AM

Hey Guys, I was able to find a exterior windshield visor for my 53 customline. Wondered if any one had experience putting one on. What size and length screws to use. Two on each end and one on the top center. Thanks for any help.

41ford1 · 04-25-2021, 08:35 AM

Check this thread: https://www.fordbarn.com/forum/showthread.php?t=203088

The screws are #12 X 1 1/2" on the sides. I believe they are the same on the center bracket. I have not removed that to check.

bobsmanstuff · 04-25-2021, 10:01 AM

Thanks

RalphG · 04-25-2021, 10:02 AM

Mine on the 52 Merc has small screws each end on the drip rail and very large through the roof on the centre bracket.
Edit. the outer screws were not on the drip rail but instead were attached to the front corner post itself.

47Monarch · 04-26-2021, 09:33 AM

Sponsored Links (Register now to hide all advertisements)

I had one on a 48 pontiac center had a bracket that bolted to center widow frame ends fit in drip rail and small sheet metal screws

04-25-2021, 08:35 AM	#2
41ford1 Senior Member Join Date: May 2010 Location: ManchVegas, New Hampshah Posts: 1,589	Re: visor Check this thread: https://www.fordbarn.com/forum/showthread.php?t=203088 The screws are #12 X 1 1/2" on the sides. I believe they are the same on the center bracket. I have not removed that to check. __________________ You are never to old to enjoy your childhood. Forty1fordpickup on the HAMB. Last edited by 41ford1; 04-25-2021 at 09:04 AM. Reason: screw size

04-25-2021, 10:01 AM	#3
bobsmanstuff Senior Member Join Date: Sep 2018 Location: Mora Minn Posts: 163	Re: visor Thanks

04-25-2021, 10:02 AM	#4
RalphG Senior Member Join Date: Sep 2014 Location: Sask. Canada Posts: 2,424	Re: visor Mine on the 52 Merc has small screws each end on the drip rail and very large through the roof on the centre bracket. Edit. the outer screws were not on the drip rail but instead were attached to the front corner post itself. __________________ https://www.youtube.com/user/roosty6/videos Last edited by RalphG; 04-26-2021 at 09:38 AM.

04-26-2021, 09:33 AM	#5
47Monarch Senior Member Join Date: Aug 2018 Location: Sydney Nova Scotia Posts: 126	Re: visor Sponsored Links (Register now to hide all advertisements) I had one on a 48 pontiac center had a bracket that bolted to center widow frame ends fit in drip rail and small sheet metal screws

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

04-25-2021, 07:47 AM	#1
bobsmanstuff Senior Member Join Date: Sep 2018 Location: Mora Minn Posts: 163	visor Hey Guys, I was able to find a exterior windshield visor for my 53 customline. Wondered if any one had experience putting one on. What size and length screws to use. Two on each end and one on the top center. Thanks for any help.