|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
03-02-2014, 10:31 AM | #1 |
Member
Join Date: Oct 2013
Location: Canton IL
Posts: 59
|
Repro suppliers, who is the best?
The first site I found when i started looking for parts was Mac's. Looking through the site I have found lots of stuff I think we will end up needing. While looking through hundred of different posts I have rarely seen anyone call for going to macs for parts. I see Info about Bert's, Snyders, and a number of different speciality suppliers that focus on just s few items. I notice many of the prices on Mac's are lower, I know some things are cheap because they are of lesser quality. Do I hear fewer recommendations for Mac's because they sell lesser quality items or is it that everything they sell is repro? My car had a "half way" restore done to it along time ago and there is much that is not right. So, I have no fine point aspirations, therefore repro is no issue for me as long as they are quality parts and are basically "correct".
__________________
--------------------------------------------------------------- If it was easy everyone would be doing it /Tony |
03-02-2014, 10:36 AM | #2 |
Senior Member
Join Date: May 2010
Location: ASTON, PA.
Posts: 725
|
Re: Repro suppliers, who is the best?
For me Brattons auto parts 1st choice, 2nd is Snyders
Mike |
Sponsored Links (Register now to hide all advertisements) |
|
03-02-2014, 10:37 AM | #3 |
Senior Member
Join Date: May 2010
Location: Northern New Jersey
Posts: 1,262
|
Re: Repro suppliers, who is the best?
I have dealt exclusivly with Bratton's ( www.brattons.com ) for the past thirty years and have never had a problem with their parts, service, return policy,etc. A real solid company with an emphasis on service.
|
03-02-2014, 10:40 AM | #4 |
Senior Member
Join Date: Jun 2010
Location: Paoli , Indiana
Posts: 242
|
Re: Repro suppliers, who is the best?
Brattons good parts, quick shipping and Gas light in Ohio
Later kb |
03-02-2014, 10:56 AM | #5 |
Senior Member
Join Date: May 2010
Location: Mpls, MN
Posts: 27,582
|
Re: Repro suppliers, who is the best?
When it comes to repro parts you have to deal with fit and quality of the part, and there are good and bad repro parts from all the dealers, but I have found the best quality when dealing with A&L, Bert's, Bratton's, and Snyder's.
If you are placing several small orders, then shipping charges play a big part also, and as I recall A&L and Bert's have always only charged me actual shipping costs. |
03-02-2014, 11:39 AM | #6 |
Senior Member
Join Date: May 2010
Location: Lewisburg,PA
Posts: 938
|
Re: Repro suppliers, who is the best?
Sponsored Links (Register now to hide all advertisements)
As a Right Coaster, I have mostly dealt with Bratton's and Mac's, plus I have a really good A restorer/shop nearby, so I try to buy from him locally-but he also buys his new stuff from suppliers (but he has lots of original stuff ,too). |
03-02-2014, 11:48 AM | #7 |
Member
Join Date: Jul 2011
Location: Forksville PA.
Posts: 44
|
Re: Repro suppliers, who is the best?
I stopped in to bill's Model A yesterday & WOW was I impressed with all his stock plus he is a real nice guy with good prices
|
03-02-2014, 11:51 AM | #8 |
Member
Join Date: Aug 2013
Location: Nicholson, Pa.
Posts: 84
|
Re: Repro suppliers, who is the best?
Just curious,who and where is the restorer near Lewisburg. I have had carriages restored at the Vicksburg Buggy shop but was unaware of a model A shop in that area.
|
03-02-2014, 11:57 AM | #9 |
Member
Join Date: Jul 2011
Location: Forksville PA.
Posts: 44
|
Re: Repro suppliers, who is the best?
|
03-02-2014, 12:18 PM | #10 |
Senior Member
Join Date: May 2010
Location: Woodstock, Illinois
Posts: 597
|
Re: Repro suppliers, who is the best?
If you do not know who A&L is you are missing one of the best Model A Parts suppliers in the hobby. Al Lepore (passed away) made some of the best Model A Repro parts available and sold tot he dealers. His son is carrying on the tradition. When ever I can I support A&L because he supported us all of his life. He made the tire valve stems and hubcaps and all the little detail stuff.
A&L Parts 1-860-693-0112 |
03-02-2014, 12:35 PM | #11 |
Senior Member
Join Date: May 2010
Location: Lakeville, MN
Posts: 5,164
|
Re: Repro suppliers, who is the best?
I would tend to stay away from Mac's. I had a couple not-go-good experiences with them in the pasts. I have heard they have new owners, but why risk it when there are many other excellent suppliers like Bratton, Bert's, and A&L. A&L has a limited inventory, but their items are usually high quality.
Rusty Nelson |
03-02-2014, 12:48 PM | #12 |
Senior Member
Join Date: Sep 2011
Location: Luck WI
Posts: 550
|
Re: Repro suppliers, who is the best?
I just downloaded a PDF of A&L's catalog, does anyone know if they have a WEB site? I can't find one.
__________________
Jon "If you choose to not decide, you still have made a choice!" RUSH Don't tell me what you know..... Tell me what you have done. |
03-02-2014, 01:31 PM | #13 |
Senior Member
Join Date: May 2010
Posts: 4,179
|
Re: Repro suppliers, who is the best?
FWIW:
Of "all" those Model A vendors mentioned above, I have ordered from most of them & I will continue to try to order parts from most of them. I figure if a self-employed U. S. citizen has enough intestinal fortitude to jump up & open, & try to run, or even take over a business in 2014, with all of the business obstacles thrown at him from our elected, warped minded official dictators, I will jump up & try my best to help him. If any of us have any type of complaints, let us please kindly notify these gentlemen whether they have been in business 50 years or (2) weeks. Any ambitious business person in his right mind who is brave enough to take over & run a business today welcomes what we as customers refer to as complaints; but to them, as struggling business people, complaints are beneficial "constructive criticisms". None of these guys enjoy an (8) to (5) job to "stay" in business; & we can help them immensely by rendering constructive criticism "directly" to the business "owners". No self-employed business owners & no clerks today are perfect; but these guys are fully aware that they need us as much as we need them. Maybe just me, but I will continue to have profound respect for "all" of these brave Model A gentlemen & will try to help them when I need Model A parts. Last edited by H. L. Chauvin; 03-02-2014 at 01:33 PM. Reason: typo |
03-02-2014, 01:56 PM | #14 |
BANNED
Join Date: May 2010
Location: Bucks County, PA
Posts: 11,454
|
Re: Repro suppliers, who is the best?
everyone has there specialties that others don't carry such as snyders ceramic coated exhaust manifolds. these things you learn over time but the main players have been mentioned. tams model A in MA is also great to deal with, joe is very knowledgable and usually answers the phone. his prices are usually cheaper for the same items from other places.
bills model A acres bought out renningers stock last year when they closed up. |
03-02-2014, 03:28 PM | #15 |
Senior Member
Join Date: Oct 2012
Location: Whangarei, New Zealand
Posts: 298
|
Re: Repro suppliers, who is the best?
I think you'll find that each part needs to be investigated somewhat - there's unlikely to be a single supplier with all the best parts. They'll all have a range of quality, and some of them make it known which parts are OK, Good, or Excellent.
When I've ordered parts from the suppliers in the USA, I used Macs - none of the others I emailed ever replied!
__________________
Allan '29 Tudor, Canadian RHD Whangarei, NZ "Duct Tape can't fix stupid, but it can MUFFLE the sound" |
03-02-2014, 03:42 PM | #16 |
Senior Member
Join Date: May 2010
Location: South East NJ
Posts: 3,398
|
Re: Repro suppliers, who is the best?
Here is the deal. And it can get confusing....
The venders often inter-sell parts. Please do not take this at 100%, but from what I have learned.... Brattons may have the brake parts made up and sell to Synders. Synders makes up the seat springs they sell at Brattons. The burnout proof condenser comes from A&L. I believe someone reported getting their rear motor mount rubbers from Synders and it is the one made by Bratton's (Brattons are spot on to original only with the Brattons logo on them). There are only a few wood places so all the retailers are buying from the same guys. Same for interior. Now some parts are made by multiple places. Then you have to ask which parts are good to use. So the best thing to do is first search this board and if you can not find a good answer then ask. There are some parts only carried by one vender and then you have no choice. Like shock seal kits I believe Synder's and Bratton's have different kits. I talked to Bratton's once about how they source the parts. They have a tough time finding shops that want to do the work and do it right. We are lucky to have several quality outfits making up new parts that can keep our cars running like factory. |
03-02-2014, 03:50 PM | #17 |
Senior Member
Join Date: Dec 2012
Location: SOCAL
Posts: 557
|
Re: Repro suppliers, who is the best?
Try the "Early Ford Store" in San Dimas, Ca. I go there a lot. Decent prices on most of his stuff.
Phone: (909)305-1955 108 West Bonita Avenue San Dimas, CA 91773 WWW.EARLYFORDSTORE.COM |
03-02-2014, 04:01 PM | #18 |
Senior Member
Join Date: May 2010
Location: Southern California
Posts: 7,032
|
Re: Repro suppliers, who is the best?
All of the suppliers posted have a good reputation. There are sometimes parts that have one best source that does not wholesale that part to the other dealers. These is no one answer. An example being Model A headlight reflectors. Bratton's has just come out with reflectors that apparently the best ones available. To my knowledge they have not sold these wholesale to the other suppliers.
Charlie Stephens |
03-02-2014, 05:17 PM | #19 |
Senior Member
Join Date: May 2010
Location: Rhode Island
Posts: 1,868
|
Re: Repro suppliers, who is the best?
Brattons headlight reflectors are high quality
|
03-02-2014, 06:48 PM | #20 |
Senior Member
Join Date: May 2010
Location: Richland Mi.
Posts: 1,172
|
Re: Repro suppliers, who is the best?
I have ordered from Bratton's just after lunch and had it at my doorstep in Michigan, 630 miles away, at 5 PM the next day. Great people to ask questions of and to deal with.
Bert's A&L, and Snyders are also great to deal with. Remember this will be a relationship over the years. |
03-02-2014, 07:17 PM | #21 |
Senior Member
Join Date: Dec 2011
Location: Jupiter, FL
Posts: 536
|
Re: Repro suppliers, who is the best?
We have been upgrading a '31 and doing a frame off restoration on a '30. The best service has been from Bratton's and Bill's Model A Acres and the worst svc from Macs and Mike's.
|
03-02-2014, 07:23 PM | #22 |
Senior Member
Join Date: Nov 2010
Location: Franklin, TN
Posts: 124
|
Re: Repro suppliers, who is the best?
I have ordered from Berts, Snyders, Brattons, Mikes, and A&L with good results for the most part. I have to say that Snyders Catalog drives me nuts because it does not have an index. I like Brattons catalog a lot. I have ordered the same part from different suppliers and have found significant differences in quality and design. It would be great if there was a listing somewhere showing the manufacturing source for each part.
|
Sponsored Links (Register now to hide all advertisements) |
|
03-02-2014, 08:38 PM | #23 |
Senior Member
Join Date: May 2010
Location: Camino, CA.
Posts: 3,086
|
Re: Repro suppliers, who is the best?
I mostly buy from Brattons but there are at least 3 or 4 good suppliers.
|
03-02-2014, 09:49 PM | #24 |
Senior Member
Join Date: May 2010
Location: Sacramento, CA
Posts: 216
|
Re: Repro suppliers, who is the best?
If you ever have a question about the quality of a reproduction part you need to buy call Steve at Bert's . He knows what excellent , good and not good.
|
03-02-2014, 10:07 PM | #25 |
Senior Member
Join Date: Oct 2013
Location: Orlando, FL / St. Stephen, NB
Posts: 195
|
Re: Repro suppliers, who is the best?
I ordered a catalog from Bratton's and have yet to receive it. Its been a long time.
|
03-02-2014, 11:02 PM | #26 | |
Senior Member
Join Date: May 2010
Location: Lewisburg,PA
Posts: 938
|
Re: Repro suppliers, who is the best?
Sponsored Links (Register now to hide all advertisements)
Quote:
|
|
03-02-2014, 11:10 PM | #27 |
Senior Member
|
Re: Repro suppliers, who is the best?
As you can see there is no one answer to your question. I also find a lot has to do with your definition of restoration. While you can get parts that work there are some vendors that deal in parts that look closer to the original then others.
My suggestion is to get catalogs from all the vendors mentioned here and look at them to see what parts they have to offer that fits your needs and price.
__________________
What's right about America is that although we have a mess of problems, we have great capacity - intellect and resources - to do some thing about them. - Henry Ford II |
03-02-2014, 11:22 PM | #28 |
Senior Member
Join Date: May 2010
Location: santa cruz, calif
Posts: 2,011
|
Re: Repro suppliers, who is the best?
|
03-03-2014, 12:39 AM | #29 |
Senior Member
Join Date: May 2010
Location: Torrington, CT
Posts: 121
|
Re: Repro suppliers, who is the best?
|
03-03-2014, 11:56 AM | #30 |
Senior Member
Join Date: May 2010
Location: San Diego,Ca
Posts: 1,377
|
Re: Repro suppliers, who is the best?
I am fairly new to the hobby, I soon found out about the junk parts that are sold, even those that were Ford approved, I asked the 2 vendors I purchased from about refunds for parts that I modified to make work but could not use, my first vendor seem to evade the issue, reluctant to dip his finders in the till, that cost him $4-5000 over the last 5 years.
Very happy with Snyders, Berts and Brattons.
__________________
Nothing can be made foolproof, ---- fools are ingenious bastards. |
03-03-2014, 02:21 PM | #31 |
Senior Member
Join Date: May 2010
Location: Northern New Jersey
Posts: 1,262
|
Re: Repro suppliers, who is the best?
Does "Bill's Model A Acres" have a web site or a hard copy parts catalog ?
|
03-03-2014, 02:26 PM | #32 |
Senior Member
Join Date: May 2010
Location: Durango CO
Posts: 1,309
|
Re: Repro suppliers, who is the best?
Mac's is now owned by Eckler's, a giant in the Chevy aftermarket business. If they run Mac's like they run the Chevy business, it should be good for everybody.
|
03-03-2014, 03:17 PM | #33 |
Senior Member
Join Date: May 2010
Posts: 332
|
Re: Repro suppliers, who is the best?
Snyders Index is in the front of the catalogue , Snyders has both Model T and Model A parts and the index is in front of the Model T section. Brattons index is in the back.
|
03-03-2014, 03:26 PM | #34 |
Junior Member
Join Date: Jun 2012
Location: Bridgton,Maine
Posts: 20
|
Re: Repro suppliers, who is the best?
I have found both Bratton's and TAM'S to be very helpful, knowledgeable, and excellent to deal with. They even understand my right hand drive problems!
|
03-03-2014, 04:02 PM | #35 |
Senior Member
Join Date: Dec 2011
Location: Jupiter, FL
Posts: 536
|
Re: Repro suppliers, who is the best?
Not to be short, but NO. Yet, some of us think he's great. He's One man Band, so give him lots of time to fill you order.
Last edited by Skibb; 03-03-2014 at 04:09 PM. |
03-04-2014, 01:00 AM | #36 | |
Senior Member
|
Re: Repro suppliers, who is the best?
Quote:
They must not be. Do a search on this Forum and you will find more problems then successes listed. I'm waiting for a part from December, next two weeks, next two weeks, next two weeks, is all I hear.
__________________
What's right about America is that although we have a mess of problems, we have great capacity - intellect and resources - to do some thing about them. - Henry Ford II |
|
03-04-2014, 01:05 AM | #37 | |
Senior Member
|
Re: Repro suppliers, who is the best?
Quote:
__________________
What's right about America is that although we have a mess of problems, we have great capacity - intellect and resources - to do some thing about them. - Henry Ford II |
|
03-04-2014, 08:23 AM | #38 |
Senior Member
Join Date: Sep 2011
Location: Luck WI
Posts: 550
|
Re: Repro suppliers, who is the best?
For those who have asked here is the url for the PDF I found of the A&L catalog.
http://www.scvcma.org/documents/bull...talog-2012.pdf
__________________
Jon "If you choose to not decide, you still have made a choice!" RUSH Don't tell me what you know..... Tell me what you have done. |
03-04-2014, 10:17 AM | #39 |
Senior Member
Join Date: May 2010
Location: Rocklin, CA
Posts: 1,219
|
Re: Repro suppliers, who is the best?
Over the years I have traveled to and interviewed most of the above mentioned parts vendors. They all are quite good to deal with. I like the suggestion that was made about buying from a local guy, it is always good to deal with someone in your area. In the last issue I had an article about Arizona Model A this is another vendor located in the Phoenix area that has lots of new and used stuff.
|
03-19-2014, 07:29 PM | #40 |
Junior Member
Join Date: Oct 2013
Location: Levin, New Zealand
Posts: 17
|
Re: Repro suppliers, who is the best?
I have just ordered 56 bucks worth of parts through snyders this week to be shipped to New Zealand. Fan belt, radiator cap, set of hoses and clamps. Get the invoice yesterday and they are stinging me 99 bucks for freight.
Got a 40s motorcycle helmet the other week on ebay. Arrived in a huge box(probably twice the size of the box needed for my A Parts) and shipping was only 50 bucks! Lesson: Get a shipping quote before you buy with snyders... |
03-19-2014, 09:04 PM | #41 |
Senior Member
Join Date: Dec 2010
Location: pittsburgh pa
Posts: 576
|
Re: Repro suppliers, who is the best?
I deal with Snyders a ton as they are only 45 mins away . Boy do they like to see me coming .Brattons is my second choice as the parts will be there next day .
__________________
Please call or email while website is down! 412 867 1659 [email protected] https://www.facebook.com/flop.custom |
03-20-2014, 01:40 AM | #42 |
Senior Member
Join Date: Sep 2012
Location: Eureka, California
Posts: 1,716
|
Re: Repro suppliers, who is the best?
Tom Wessenberg writes in an earlier post:
"When it comes to repro parts you have to deal with fit and quality of the part, and there are good and bad repro parts from all the dealers, but I have found the best quality when dealing with A&L, Bert's, Bratton's, and Snyder's." "If you are placing several small orders, then shipping charges play a big part also, and as I recall A&L and Bert's have always only charged me actual shipping costs." __________________________________________________ Tom echoes my sentiments exactly. - Doug Vieyra, in Eureka, Calif |
Sponsored Links (Register now to hide all advertisements) |
|
03-20-2014, 03:10 AM | #43 |
Senior Member
Join Date: May 2012
Location: Las Vegas
Posts: 138
|
Re: Repro suppliers, who is the best?
What a great thread. I hadn't really considered Bratton's, but a lot of guys seem to like them. Good to know,
__________________
kris |
03-20-2014, 07:55 AM | #44 |
Senior Member
Join Date: Mar 2012
Location: Fairfield, Virginia
Posts: 615
|
Re: Repro suppliers, who is the best?
I have ordered from many of the vendors mentioned. I understand when people get upset when a part is NOT readily available, but having been a sales rep for a wholesaler (not auto parts) for 19 years I understand that the company you order from can NOT always control when a part you ordered is not available and their suppliers don't always supply them with good information.
Every supplier mentioned has had things go wrong at one time or the other. Tell them your problems and persist until you are satisfied. I don't favor any of them, but I will say that I have ordered from MAC's several times in the last three years and the one problem I had was resolved quickly. I strongly suggest we should NOT be saying negative things about any of our suppliers. I suggest that if you aren't happy with a vendor don't order from them, but don't bad mouth them UNLESS there is fraud involved. Instead, make POSITIVE recommendations. Just my TWO cents worth. |
03-20-2014, 08:19 AM | #45 |
Senior Member
Join Date: Aug 2011
Location: Eagle Bend, MN
Posts: 2,025
|
Re: Repro suppliers, who is the best?
I have ordered from several of the suppliers mentioned. More often than not I go to Mac's. Their catalogs are second to none, very seldom are parts on backorder, and are usually the lowest or close to it on price. They are a long ways away from me and don't usually ship the same day so they are not so quick but hey, I'm not usually in too big of a hurry anyway. I've had very good luck with their quality. I guess I can say I haven't had problems from any of the suppliers I've ordered from. Some people seem to always have trouble, no matter who they do business with. Common sense and realistic expectations go a long way in life.
|
03-20-2014, 08:29 AM | #46 |
Senior Member
Join Date: Mar 2014
Location: Cleveland, Ohio
Posts: 2,763
|
Re: Repro suppliers, who is the best?
Sponsored Links (Register now to hide all advertisements)
|
03-20-2014, 08:29 AM | #47 |
Senior Member
Join Date: Dec 2011
Location: Jupiter, FL
Posts: 536
|
Re: Repro suppliers, who is the best?
Same here.
For me, MACS has been a mine field of poor to bad service. As for saying only positive things, I respect that point of view but when you've had bad service speak up so others don't get the same. Last edited by Skibb; 03-20-2014 at 08:39 AM. |
03-20-2014, 09:58 AM | #48 |
Senior Member
Join Date: May 2010
Location: Wheeling, WV - U.S.A.
Posts: 241
|
Re: Repro suppliers, who is the best?
Like Flop, I too usually deal with Snyders or Brattons. Being in Wheeling, WV - Snyders is only about 1 hour away, and once again like Flop, boy do they like to see me walk in the door! Never had any problems with either one of them and they are both not too far away...lucky me!
Brian W. |
03-20-2014, 10:02 AM | #49 |
BANNED
Join Date: May 2010
Location: Gothenburg Nebraska Just off I-80
Posts: 4,893
|
Re: Repro suppliers, who is the best?
Berts is the best, next question please. Rod
__________________
Do the RIGHT thing - Support the H.A.M.B. Alliance!!!! |
03-20-2014, 04:32 PM | #50 |
Junior Member
Join Date: Jun 2012
Location: Bridgton,Maine
Posts: 20
|
Re: Repro suppliers, who is the best?
I really like the folks at Tams in Massachusetts.
It's a real family operation, Joe has extensive model A knowledge and is very willing to share it. I've also bought from Bratton's. No problem with quality and I find lots of helpful info in their catalog. |
03-20-2014, 10:36 PM | #51 |
Senior Member
Join Date: May 2010
Location: Ottumwa, IA
Posts: 308
|
Re: Repro suppliers, who is the best?
Try Birdhaven Vintage Parts in Colfax IA....20 east of Desmoines on I80. Nice people and service. Parts for T A V8 thru 1957. Call for catalog.
|
03-20-2014, 11:11 PM | #52 |
Senior Member
|
Re: Repro suppliers, who is the best?
It's not the vendors that are a problem it's the manufacturers that are the problem with ill fitting parts.
__________________
What's right about America is that although we have a mess of problems, we have great capacity - intellect and resources - to do some thing about them. - Henry Ford II |
03-20-2014, 11:40 PM | #53 |
Senior Member
Join Date: May 2010
Location: Quincy, CA.
Posts: 1,708
|
Re: Repro suppliers, who is the best?
I agree with Ken, A&L Parts are spot on !!!! Our good friend Al Lepore was the best and really supported our hobby ; his son Allen is carrying on the business and doing an excellent job. Just give Allen a call and he will send you a catalog.
Ron |
03-21-2014, 08:32 AM | #54 |
Junior Member
Join Date: Oct 2013
Location: Wolfeboro, NH
Posts: 13
|
Re: Repro suppliers, who is the best?
If you're in the Northeast TAM's is great because they ship so fast and are very helpful. Their prices and shipping cost are very competitive. I've never had a problem.
|
03-21-2014, 08:07 PM | #55 |
Senior Member
Join Date: May 2010
Location: Trumbull, CT
Posts: 134
|
Re: Repro suppliers, who is the best?
A&l Has a web [email protected]
|
03-21-2014, 08:38 PM | #56 |
Senior Member
Join Date: May 2010
Location: Odessa, NY
Posts: 385
|
Re: Repro suppliers, who is the best?
Many had bad experiences with Mac's some time ago. Now I understand they have changed hands for the better. I hope so, but living in NYS I order out of state to avoid the taxes. Brattons, Snyders. A&L.
|
03-21-2014, 09:33 PM | #57 |
Senior Member
Join Date: Aug 2010
Location: Auburn, Kentucky
Posts: 194
|
Re: Repro suppliers, who is the best?
Who makes the best 30-31 cowl patch panels--LOL
It is true that the Mfg. is the determining factor not so much the catalog company's fault although they should be researching the products they are selling.
__________________
Building Horse Power -- |
03-21-2014, 09:58 PM | #58 |
Senior Member
Join Date: Dec 2011
Location: Jupiter, FL
Posts: 536
|
Re: Repro suppliers, who is the best?
For our new engine in the restoration car, I wanted to be sure we could climb hills as our driver had big trouble on the Blue Ridge Tour with big hills. Brent explained how important the cam is in this regard and suggested a Stipe IB 330 cam. So, I called and ordered one. First start was Monday, sounded swell. We have to finish the other 50% of the car before we drive it. But the machinist who put the engine togehter was impressed with the cam. Thank you Bill.
|
03-22-2014, 09:37 AM | #59 | |
Senior Member
Join Date: Aug 2010
Location: Auburn, Kentucky
Posts: 194
|
Re: Repro suppliers, who is the best?
Quote:
__________________
Building Horse Power -- |
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|