26-27 Coupe body

[Corn Fed]

26-7 T Coupe body. This coupe’s top had been unbolted/removed years ago just above the beltline & about 2/3 up the front posts. I have collected enough roof parts to put it back together. I also have a very solid extra LH quarter. The subframe is decent,but the cowl, RH quarter, & panel below decklid will need patches. My plan was to completely disassemble the body, sandblast it, & reassemble it using the nice LH quarter. Since it’s just bolts & a few rivets, it should be fairly easy. The header panel above the windshield is rusty, so it would need patching or have a new one fabricated. The doors & trunk lid are the best part of the body. I’ve had the doors for 30 years. They are super nice compared to what you find these days. One has some cracks by the hinges & a few minor pin holes. The other has a dent by the beltline. Both should be relatively easy fixes. I believe one is a 26 because it has the piano style hinges. The other has the later 27 style hinges. I am missing some of the body hinges. There are 2 latches,but they are the same side. The trunk lid has surface rust all over it, & a few minor dents, but is still a nice solid lid. I have the trunk hinges. There is a dash, “A” pillar covers, lower door moldings, & the cowl lid cover. I also have a rusty windshield frame. $1800. Must be picked up or you arrange shipping.

Will trade for 1932-34 Ford parts.

LOWERED PRICE: $1700

[Corn Fed]

Sponsored Links (Register now to hide all advertisements)

Lowered price: $1700