|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
06-24-2014, 03:25 PM | #41 |
Senior Member
Join Date: Sep 2013
Location: Cheyoming
Posts: 136
|
Re: $$$$ worth $$$$
Coupes and roadster bodys were built by Ford. Murry and Briggs built Sedans. Great looking car. have a great time with it!!!
|
06-24-2014, 03:27 PM | #42 |
Senior Member
Join Date: May 2010
Location: Alabama
Posts: 8,099
|
Re: $$$$ worth $$$$
|
Sponsored Links (Register now to hide all advertisements) |
|
06-24-2014, 05:32 PM | #43 |
Senior Member
Join Date: Sep 2012
Location: Eureka, California
Posts: 1,716
|
Re: $$$$ worth $$$$
Roadster top rests over trunk/rumble area are indeed necessary for resting the roadsters top, while it is laid down.
As has been said previously, they are not correct nor original to the coupe with a rumble seat. Also as has been said earlier, when they are used, it is as a 'dress up' enrichment. However, as a practical matter, they are a 'pain in the butt' (or more accurately - the ankle) and act as a hindrance and safety risk when anyone over twenty-five tries to act young and climb into the awkward-accessing 'Rumble Seat' That not withstanding, I see a lot of potentially 'nice' features on this car, which indicates that the restorer built it for functional driving in today's fast and crowded streets and highways. And who know what other improvement features have been added that we do not see. But to answer the original post - how much is it worth ? My grandfather bought one new in '31, for about $500. So, I figure that this one (with 80+ years of depreciation) ought to go for about $100. Of course, some would argue that depreciation is more than countered with the U.S. Dollar's INFLATION ! And then too, some would argue that 'improvements' also raise the price : 'C' engine, Mitchel transmission and Over-Drive, electronic ignition, Stromberg Carb. with down-draft manifold, exhaust headers, Aries s/s muffler, Flat-head Ted brakes, water/oil gauges, Roll-down rear window, etc., etc. And then there is "paint jobs", and then there are paint jobs; Ford metal (fenders, etc.) verses after-market. I went for the 'real deal' (all of the above + side-mounted spares, trunk behind Rumble Seat, etc.) - basically a 'Show Car' that had been retro-fitted for touring. It looks like the photo (Ford Maroon) that Jerry Kzoo posted above. I paid $18,000 for mine. So depending on 'what is under the hood' and how she drives, I would join the majority of other who posted here previously and say $10,000 - $12,000 should be in the 'ball park' for this yellow coupe. Of course, the answer may lay somewhere between the $10,000 at the low end, and $18,000 at the high end. It depends on 'what is under the hood' and how she drives - and how much of the car was put together with Henry Ford parts and how much was not. A picture may be worth a thousand words, but not necessarily a thousand dollars. It takes much more than a photo to tell the whole story. That being said, it sure 'looks' like it ought to be worth $10,000, maybe more. Last edited by DougVieyra; 06-24-2014 at 06:11 PM. |
06-24-2014, 06:08 PM | #44 | |
Senior Member
Join Date: May 2010
Location: Southern California
Posts: 7,033
|
Re: $$$$ worth $$$$
Quote:
Charlie Stephens |
|
06-24-2014, 09:04 PM | #45 | |
Senior Member
Join Date: Jun 2014
Location: Miramar Fl
Posts: 195
|
Re: $$$$ worth $$$$
Quote:
It Is A Briggs Thank You Harley03joe Last edited by Harley03joe; 06-25-2014 at 11:07 AM. |
|
06-24-2014, 09:06 PM | #46 |
Senior Member
Join Date: Jun 2014
Location: Miramar Fl
Posts: 195
|
Re: $$$$ worth $$$$
|
06-24-2014, 09:41 PM | #47 |
Senior Member
Join Date: Jun 2011
Location: Charlottesville, Virginia
Posts: 364
|
Re: $$$$ worth $$$$
$14K,
Indented firewalls came out in June 31. The changed was occasioned by the breaking of the welds and rivets that held the steering column flange to the bottom of the tank, and then leaked gas. The complete change included the valve mounted on the recess in the firewall which was designed to take the fuel directly out of the tank into the fuel line, side bowl strainer on the carburetor (see your 31 Owners Handbook) , a new steering column support arm that fastened to the stronger cross bar above the gas tank. The service bulletins contain the note for the update kit and I believe instructions for modifying an earlier gas tank installation and finally, the safer fuel system (and that is relative) does not add any value to the car unless one wants the perceived security of not being doused with dripping gasoline from a leaking tank. |
06-25-2014, 12:05 AM | #48 |
Senior Member
Join Date: Jun 2013
Location: Carthage, Missouri
Posts: 267
|
Re: $$$$ worth $$$$
Briggs built the 2 window 4 door sedans and both Briggs and Murray built the 3 window 4 door sedans from what ive read. 2 door sedans where made by ford as with coupes ,pickups,roadsters. Please correct if im wrong.
__________________
Enjoy life , it has an expiration date. |
06-25-2014, 11:11 AM | #49 | |
Senior Member
Join Date: Jun 2014
Location: Miramar Fl
Posts: 195
|
Re: $$$$ worth $$$$
Quote:
What Is A Indented firewalls ? Is This A Indented Firewall ?? Is It Early Or Late Mod. Thank You For The Info Harley03joe |
|
06-25-2014, 11:33 AM | #50 |
Senior Member
Join Date: May 2010
Location: Lindenhurst, IL
Posts: 792
|
Re: $$$$ worth $$$$
|
06-25-2014, 12:02 PM | #51 |
Senior Member
Join Date: May 2010
Location: So Cal
Posts: 8,754
|
Re: $$$$ worth $$$$
This is an indented firewall.
Bob |
06-25-2014, 12:41 PM | #52 | |
Senior Member
Join Date: Jun 2014
Location: Miramar Fl
Posts: 195
|
Re: $$$$ worth $$$$
Quote:
|
|
06-25-2014, 12:42 PM | #53 |
Senior Member
Join Date: Jun 2014
Location: Miramar Fl
Posts: 195
|
Re: $$$$ worth $$$$
|
06-25-2014, 12:58 PM | #54 |
Senior Member
Join Date: May 2010
Location: Lindenhurst, IL
Posts: 792
|
Re: $$$$ worth $$$$
That stamp could show up anywhere, could have been ground off on a previous repaint or even buried in the primer coat. I didn't notice mine until I striped the paint.
Your car looks like a keeper, enjoy. |
06-25-2014, 01:25 PM | #55 | |
Senior Member
Join Date: Jun 2014
Location: Miramar Fl
Posts: 195
|
Re: $$$$ worth $$$$
Quote:
What Do You Think Of This Installation Pad "Just what you need for touring in those hot temps! Mounts to the inside of the firewall. Has a black plastic facing that has mold marks to resemble the old original firewall. U.S.A." Snyder’s Antique Auto Parts, Inc. 12925 Woodworth Rd., New Springfield, Ohio 44443 Toll Free (888) 262-5712 |
|
06-25-2014, 06:46 PM | #56 |
Senior Member
Join Date: Jan 2012
Location: NW Ohio
Posts: 301
|
Re: $$$$ worth $$$$
I have a friend who recently listed his 29-30 (not sure) pick-up for sale a got $24,000.
Driven quite often and looked great. Buyer was from down South, my friend lives up North. So it goes back to being worth whatever a buyer wants to pay. I also know a lady who has an immaculate 30 sedan with a trunk and she wants $18,000. A local guy is seriously considering that one. |
06-25-2014, 07:32 PM | #57 | |
Senior Member
Join Date: Jun 2014
Location: Miramar Fl
Posts: 195
|
Re: $$$$ worth $$$$
Quote:
What Did You Think Of The Fire Wall Insalator I Found ?? Thanks Harley03joe |
|
06-25-2014, 07:36 PM | #58 |
Senior Member
Join Date: Jun 2014
Location: Miramar Fl
Posts: 195
|
Re: $$$$ worth $$$$
|
06-25-2014, 07:48 PM | #59 |
Senior Member
Join Date: Jun 2014
Location: Miramar Fl
Posts: 195
|
Re: $$$$ worth $$$$
|
06-25-2014, 08:11 PM | #60 |
Senior Member
Join Date: Jun 2011
Location: Upstate South Carolina
Posts: 794
|
Re: $$$$ worth $$$$
You DONT have the indented firewall. Compare where your fuel line comes through the firewall with the one that BobC posted. Your fuel line shutoff should be on the inside, not under the hood. Nice car, enjoy.
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|