The Ford Barn

fortyman · 03-01-2021, 10:40 AM

The front bumper grommets for 1940 Ford Fordor. One side of the grommet is wider. Does the wide side go toward the inside or outside?

51 MERC-CT · 03-01-2021, 12:19 PM

If you are talking about the bracket grommet, as I recall they are installed from the outside with the appropriate side facing out.

19Fordy · 03-01-2021, 12:39 PM

Sponsored Links (Register now to hide all advertisements)

On a 40 coupe the front has the wide side to the inside.
On the rear the wide side is toward the outside.
I would think the same is for a 4 door as the fenders are the same.

03-01-2021, 10:40 AM	#1
fortyman Member Join Date: Aug 2011 Posts: 35	Front Bumper Grommets The front bumper grommets for 1940 Ford Fordor. One side of the grommet is wider. Does the wide side go toward the inside or outside?

03-01-2021, 12:19 PM	#2
51 MERC-CT Senior Member Join Date: May 2010 Location: East Hartford, Ct Posts: 5,898	Re: Front Bumper Grommets If you are talking about the bracket grommet, as I recall they are installed from the outside with the appropriate side facing out. __________________ DON'T RECALL DOING SOMETHING FOR MYSELF BASED ON SOMEONE ELSE'S LIKES OR DISLIKES

03-01-2021, 12:39 PM	#3
19Fordy Senior Member Join Date: May 2010 Location: Coral Springs FL Posts: 10,919	Re: Front Bumper Grommets Sponsored Links (Register now to hide all advertisements) On a 40 coupe the front has the wide side to the inside. On the rear the wide side is toward the outside. I would think the same is for a 4 door as the fenders are the same.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode