|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
10-04-2020, 07:35 PM | #1 |
Member
Join Date: Jun 2019
Posts: 33
|
Marvel Carburetors
So, I have 5 Marvel carburetors in my collection of Model A stuff. I am wondering if anybody knows where I can send them out to be rebuilt? Well, two of them anyway. Or does anyone know where I can get rebuild kit(s)?
Mark in Fairbanks Alaska |
10-04-2020, 07:48 PM | #2 |
Senior Member
Join Date: Sep 2016
Location: Long Island
Posts: 172
|
Re: Marvel Carburetors
Try googling Renners Corner
|
Sponsored Links (Register now to hide all advertisements) |
|
10-04-2020, 08:15 PM | #3 |
Senior Member
Join Date: Jul 2011
Location: Redondo Beach, CA
Posts: 5,855
|
Re: Marvel Carburetors
Yes, call David at Renner's Corner https://rennerscorner.com/carburetor.html. David is a good guy and will fix you up with what you need. He has rebuild kits and parts. He also has some used parts that are not listed so if you don't see it, ask. I just got a good used throttle shaft to replace my worn one.
Also check the slide show https://rennerscorner.com/slide-show--info.html for info on MarVel Schebler/Allstate/Johnson carburetors. |
10-04-2020, 08:21 PM | #4 |
BANNED
Join Date: Feb 2013
Location: Coatesville, Pa
Posts: 719
|
Re: Marvel Carburetors
Jim Bullock in Texas. JMACARBS.com The expert on Marvel Carbs
|
10-05-2020, 06:58 AM | #5 |
Member
Join Date: Oct 2010
Location: Ridgefield Washington
Posts: 87
|
Re: Marvel Carburetors
x2 on Jim Bullock
|
10-05-2020, 08:48 AM | #6 |
Senior Member
Join Date: Jun 2010
Location: Polk City, Iowa
Posts: 526
|
Re: Marvel Carburetors
Sponsored Links (Register now to hide all advertisements)
__________________
Steve Hanna, Polk City, IA |
10-05-2020, 09:03 AM | #7 |
Senior Member
Join Date: May 2010
Location: Lynden, Wa
Posts: 3,554
|
Re: Marvel Carburetors
Renners no longer rebuilds carbs. But they still sell parts for them.
Mike
__________________
1930 TownSedan (Briggs) 1957 Country Sedan |
10-05-2020, 09:05 AM | #8 |
Senior Member
Join Date: Aug 2018
Posts: 2,332
|
Re: Marvel Carburetors
Jim Bullock x4 - bought a rebuilt from him this year, very satisfied, If rebuilt by him they are tested/use flow tested jets, runs a ton better then the 2 rebuilt zeniths I also have. Since they are tested they have the Gas line adapter fitting on them. Simply swap in , form your gas line for the Marvel - maybe adjust the idle jet where you want. He sends instructions with the carb. Quick turnaround. My truck will now idle at 420 rpm which it previously would only idle smoothly down to 500 rpm, never stalls, seems to run better/smoother.
|
10-05-2020, 03:56 PM | #9 |
Senior Member
Join Date: Jul 2018
Location: Dallas, TX, Angola, IN
Posts: 157
|
Re: Marvel Carburetors
Jim x 5.
|
10-06-2020, 01:44 PM | #10 |
Member
Join Date: Feb 2017
Location: Iowa City, IA
Posts: 84
|
Re: Marvel Carburetors
Jim x6
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|