|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
07-30-2021, 12:06 PM | #1 |
Senior Member
Join Date: Dec 2019
Location: Gardnerville, Nevada
Posts: 185
|
34 ford firewall data plates
I have a 1934 Fod original car (Original Paint). I would like to replace the two Data Plates located on passenger side of Firewall. I purchased two and found that the holes do not line up with holes in firewall. DOES ANYONE know where I can get the correct ones. THANKS ! Stan
|
07-30-2021, 12:17 PM | #2 |
Senior Member
Join Date: May 2010
Location: Essex Vermont
Posts: 599
|
Re: 34 ford firewall data plates
Stan, as far as I know there was only one data plate on 34 firewall. Some one may chime in with better info. Ken
|
Sponsored Links (Register now to hide all advertisements) |
|
07-30-2021, 12:47 PM | #3 |
Senior Member
Join Date: May 2010
Location: Lake Elsinore, CA.
Posts: 413
|
Re: 34 ford firewall data plates
My '33 has two data plates:
1) Patent Data Plate 2) Body Number Plate |
07-30-2021, 12:52 PM | #4 |
Senior Member
Join Date: Dec 2014
Location: California
Posts: 802
|
Re: 34 ford firewall data plates
|
07-30-2021, 12:58 PM | #5 |
Senior Member
Join Date: May 2010
Location: southeastern Michigan
Posts: 10,094
|
Re: 34 ford firewall data plates
Sponsored Links (Register now to hide all advertisements)
Stan, Sorry, but I can't recommend a sources for the two plates that you seek. But, beware that not all of the many versions of the pre-WWII patent plates have been reproduced and that what may be available isn't correct for your car even if the holes line up. In some model years, there is an early version and a late version and only a very limited number of them were the same from one model year to the next, despite what some sellers advertise. |
|
|
Sponsored Links (Register now to hide all advertisements) |
|