|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
10-22-2017, 01:25 PM | #1 |
Member
Join Date: Feb 2011
Location: sacramento
Posts: 59
|
window regulator rebuild
i was wondering if anyone has pictures of how the gear hosing go together? i had two . both were missing parts. im trying to make one but i want to make sure everything is right before i weld it back together . thanks for any help in advance . kyle
|
10-22-2017, 01:57 PM | #2 |
Senior Member
Join Date: Jun 2017
Posts: 175
|
Re: window regulator rebuild
Does this help?
|
Sponsored Links (Register now to hide all advertisements) |
|
10-22-2017, 05:08 PM | #3 |
Member
Join Date: Feb 2011
Location: sacramento
Posts: 59
|
Re: window regulator rebuild
divcoone . no im looking for pics of how the gear plate s and springs go on the inside of the round hosing .its a fairly simple assembly but it does not hold the widow up. it keeps sliping down so i want to make sure the plates are in the right positions .thanks for the help though .kyle
|
10-22-2017, 07:59 PM | #4 |
Senior Member
Join Date: May 2010
Posts: 332
|
Re: window regulator rebuild
I thought the part was rivited together , make sure the gears are the same on both regulators because I thought there was two different styles . Check the Snyders or Bratton parts books .
|
10-22-2017, 08:13 PM | #5 |
Senior Member
Join Date: May 2010
Location: Auburn Washington
Posts: 2,552
|
Re: window regulator rebuild
Sponsored Links (Register now to hide all advertisements)
it would better if you showed which window regulator you are working on. there is four or five different ones in the Model A`s. |
|
|
Sponsored Links (Register now to hide all advertisements) |
|