Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 07-28-2020, 01:14 PM   #1
rivcokid
Senior Member
 
rivcokid's Avatar
 
Join Date: Sep 2018
Location: Riverside, CA
Posts: 171
Default Slamming into first gear

Since i bought my roadster almost 2 years ago, I've had some intermittent problems going from neutral to first at a stop. Usually, i just move the car a bit and no problem. I had a local chop do a lube job and change the fluids a couple of weeks ago, and the put in some pretty thin oil into the transmission. It seemed like the gears would not stop spinning and it was difficult to shift from neutral to first without grinding/slamming. So, I got some Lubriplate SPO-288 as recommended on the MAFCA site and replaced the oil - it's nice and thick. However, it only made the slamming/gear spinning seem to lessen a bit, but it is by no means gone away. So, is there some adjustment that can be done to the transmission? I really hate to drive it in this condition because I don't want to kill the transmission. Thanks as always in advance!!
rivcokid is offline   Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 09:10 AM.