The Ford Barn

Beater · 03-04-2020, 10:38 PM

who can tell me what size the intake/ exhaust studs and nuts are on an A

Mike Peters · 03-04-2020, 11:00 PM

7/16" common thread

Beater · 03-04-2020, 11:56 PM

common thread. would that be 7/16 NC one end is 7/16 NF aswell

what is the correct length

Y-Blockhead · 03-05-2020, 12:08 AM

One thing I really like about Bratton's catalogs, both online and hard copy, is they give fastener sizes in the descriptions. https://www.brattons.com/manifold-to...-stud-set.html

None of the other vendors take this extra step to inform you.

Beater · 03-05-2020, 11:50 AM

there we go thankyou I looked them up on snyders but they don't tell you anything

Tom Endy · 03-05-2020, 12:32 PM

Sponsored Links (Register now to hide all advertisements)

According to Bretton's the four studs are 7/16-20 on one end, 7/16-14 on the other, 2 & 3/16 long. $4.25 a set.

Tom Endy

Ruth · 03-05-2020, 01:40 PM

Quote:

Originally Posted by Tom Endy

According to Bretton's the four studs are 7/16-20 on one end, 7/16-14 on the other, 2 & 3/16 long. $4.25 a set.

Tom Endy

Sometimes we really do need to read the entire thread...

03-04-2020, 10:38 PM	#1
Beater Senior Member Join Date: Aug 2015 Location: Southern Alberta Posts: 582	A intake/ exhaust studds who can tell me what size the intake/ exhaust studs and nuts are on an A

03-04-2020, 11:00 PM	#2
Mike Peters Senior Member Join Date: Aug 2012 Location: South East Wisconsin Posts: 1,279	Re: A intake/ exhaust studds 7/16" common thread

03-04-2020, 11:56 PM	#3
Beater Senior Member Join Date: Aug 2015 Location: Southern Alberta Posts: 582	Re: A intake/ exhaust studds common thread. would that be 7/16 NC one end is 7/16 NF aswell what is the correct length

03-05-2020, 12:08 AM	#4
Y-Blockhead Senior Member Join Date: Jul 2011 Location: Redondo Beach, CA Posts: 5,848	Re: A intake/ exhaust studds One thing I really like about Bratton's catalogs, both online and hard copy, is they give fastener sizes in the descriptions. https://www.brattons.com/manifold-to...-stud-set.html None of the other vendors take this extra step to inform you. Last edited by Y-Blockhead; 03-05-2020 at 12:56 AM.

03-05-2020, 11:50 AM	#5
Beater Senior Member Join Date: Aug 2015 Location: Southern Alberta Posts: 582	Re: A intake/ exhaust studds there we go thankyou I looked them up on snyders but they don't tell you anything

03-05-2020, 12:32 PM	#6
Tom Endy Senior Member Join Date: May 2010 Location: Southern California Posts: 3,131	Re: A intake/ exhaust studds Sponsored Links (Register now to hide all advertisements) According to Bretton's the four studs are 7/16-20 on one end, 7/16-14 on the other, 2 & 3/16 long. $4.25 a set. Tom Endy