|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
09-27-2017, 08:22 PM | #1 |
Member
Join Date: Apr 2016
Posts: 98
|
51 EAB engine Generator Mounting
This set up is the generator on top of the oil filled fan.
There is a square "washer" that holds the fan set up in a vertical plain. The engine is in the car.(40 sedan). I am having trouble making the square washer stay in place. It wants to turn as I tighten the main nut. Is there a set of directions (step by step) that someone could pass on to me. I would by very thankful. |
09-27-2017, 09:42 PM | #2 |
Senior Member
Join Date: Nov 2010
Location: NM
Posts: 2,438
|
Re: 51 EAB engine Generator Mounting
I tried once to weld an alignment lug on the square washer, it didn't work out. What works best IMO is to leave the fan belt off, tighten the fan to the gen bracket to keep the washer square, then lift the gen to tighten that belt. Now loosen the fan bracket, put the belt on it, and tighten the fan. It's about all you can do.
__________________
'52 F-1, EAB flathead |
Sponsored Links (Register now to hide all advertisements) |
|
10-07-2017, 01:48 PM | #3 |
Member
Join Date: Apr 2016
Posts: 98
|
Re: 51 EAB engine Generator Mounting
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|