|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
10-09-2011, 01:16 PM | #1 |
Senior Member
Join Date: May 2010
Location: PLYMOUTH MASS
Posts: 860
|
1940 cab+ cab/with doors
City:
pembroke
State:
ma
Price:
100.00
just picked up a 1940 ton/half. I bought it for the 95 hp motor. I have one bare cab thats rough,bottoms rotted .good top an firewall ,driprails.an seat riser are all solid. 100.00 bucks takes it . the cab thats still on the frame is complete but rough as well .big dent in the back. bottom cab corners are toast ,door bottoms are gone . will be taking it off the frame next week .400.00 for that if you need somthing let me know . i,m taking the motor ,tranny an rear=end ,,headlights off the fenders ,thats it . got two hoods with the 95 emblem in the middle ,2 sets of fenders thanks all M in M
|
10-09-2011, 01:51 PM | #2 |
Member
Join Date: Dec 2010
Location: Marshfield, MA
Posts: 60
|
Re: 1940 cab+ cab/with doors
HA! I saw those going down rt 53 earlier today! I was a few cars behind in my roadster!
|
Sponsored Links (Register now to hide all advertisements) |
|
10-09-2011, 02:45 PM | #3 |
Senior Member
Join Date: May 2010
Location: PLYMOUTH MASS
Posts: 860
|
Re: 1940 cab+ cab/with doors
small world ! BIG fords. Made you smile though didn,t it
|
10-09-2011, 11:43 PM | #4 |
Member
Join Date: Oct 2010
Location: pacific north west
Posts: 30
|
Re: 1940 cab+ cab/with doors
This is a 1 1/2 ton??
Delux or standard? Not sure yet if the parts i need will fit my 1/2 ton but what i am inquiring about is 40 standard hood ornament or nose piece? Hood hinges and supports? All inside hood latch/release hardware? may need more when i can find out what you have here |
10-10-2011, 03:50 AM | #5 |
Senior Member
Join Date: May 2010
Location: PLYMOUTH MASS
Posts: 860
|
Re: 1940 cab+ cab/with doors
This is a 1 1/2 ton fire engine , Big truck , . I have two hoods ,both have a 95 dead center of the hood ornament . hoods allso have the V8 logo stamed on the sides ,hinges are there. Don,t know about delux or standards with these big trucks . the cab is complete,nothing stripped out . thanks mp
Last edited by Mike in Mass; 10-10-2011 at 03:57 AM. |
10-10-2011, 09:00 PM | #6 |
Member
Join Date: May 2010
Location: Mansfield Center, CT
Posts: 62
|
Re: 1940 cab+ cab/with doors
Sponsored Links (Register now to hide all advertisements)
|
10-11-2011, 01:36 PM | #7 |
Senior Member
Join Date: May 2010
Location: PLYMOUTH MASS
Posts: 860
|
Re: 1940 cab+ cab/with doors
fenders are banged up for sure .complete with inner fenders and the hood sides ,that seem to be attached as well to the top of the fenders. i,ll sell all 4 fenders ,inners and sides for 150.00. if you have one of these and need something let me know an I,ll take a picture of it
|
10-14-2011, 04:26 PM | #8 |
Senior Member
Join Date: May 2010
Location: PLYMOUTH MASS
Posts: 860
|
Re: 1940 cab+ cab/with doors
btt
|
10-14-2011, 04:36 PM | #9 |
Senior Member
Join Date: May 2010
Location: PLYMOUTH MASS
Posts: 860
|
Re: 1940 cab+ cab/with doors
in between buying these trucks and 4 weeks later ,picking them up somebody stole the grill from the truck right out of the guys yard . I should have taken it with me ,,,it was off the truck, along with the extra fenders and hood . its the big 40 grill ,red paint,with rusty spots like salt an pepper, good little dent in the bottom right corner ,but easily fixable, keep an eye out any BARNERS in the New England area . let me know if you see it
|
10-17-2011, 07:35 PM | #10 |
Senior Member
Join Date: May 2010
Location: PLYMOUTH MASS
Posts: 860
|
Re: 1940 cab+ cab/with doors
don,t really want to junk these anybody interested ?
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|