The Ford Barn

elwood · 04-08-2012, 10:02 AM

These are 5 on 5.5s and I think I measured 18 from bead seat to bead seat.
Any ideas ?
Thanks

deuce lover · 04-08-2012, 11:17 AM

Chrysler.They also had the large bolt circle.

JM 35 Sedan · 04-08-2012, 11:36 AM

If they actually measure 18" at the bead diameter and maybe 19"+ at the overall diameter, I would say they are '32 Ford wheels. They also appear to have bent spokes based on looking at rather small iPhone pictures.
Now if they measure about 18" on the overall outer diameter and around 17" at the bead diameter, I would say, '33-'34 Ford and about 17" on the outer OD with 16" on the bead diameter would most likely make them '35 Ford wheels.

David J · 04-08-2012, 12:41 PM

My 33 Plymouth has this type wheels on it . 17" though . Just a guess but I would think 32 Plymouth is a good possibility . If they are 17" I would buy them as spares .

deuce lover · 04-08-2012, 01:27 PM

Not Ford wheels.Spoke design and hub design is different.Plymouth has smaller bolt pattern.

Manuel · 04-08-2012, 06:16 PM

Sponsored Links (Register now to hide all advertisements)

I can not see clearly from here but do the spokes come thru the rim and look like nail heads?
A description of 17" Dodge/Ply wire wheels:

36 spokes in 2 sizes--3" and 5".
5 stud holes and 1 smaller extra hole.
5 x 4.5" bolt circle.
Rear inner hub dia 9.5"

HTH
Manuel in Oz

04-08-2012, 11:17 AM	#2
deuce lover Senior Member Join Date: May 2010 Location: Southern France Posts: 5,306	Re: Wheel ID please Chrysler.They also had the large bolt circle.

04-08-2012, 11:36 AM	#3
JM 35 Sedan Senior Member Join Date: May 2010 Location: Near Rising Sun, Maryland Posts: 10,858	Re: Wheel ID please If they actually measure 18" at the bead diameter and maybe 19"+ at the overall diameter, I would say they are '32 Ford wheels. They also appear to have bent spokes based on looking at rather small iPhone pictures. Now if they measure about 18" on the overall outer diameter and around 17" at the bead diameter, I would say, '33-'34 Ford and about 17" on the outer OD with 16" on the bead diameter would most likely make them '35 Ford wheels. __________________ *John* *"Never give up on what you really want to do. The person with big dreams is more powerful than one with all the facts". Albert Einstein*

04-08-2012, 12:41 PM	#4
David J Senior Member Join Date: Jun 2010 Location: St Croix Falls WI Posts: 2,080	Re: Wheel ID please *My 33 Plymouth has this type wheels on it . 17" though . Just a guess but I would think 32 Plymouth is a good possibility . If they are 17" I would buy them as spares .*

04-08-2012, 01:27 PM	#5
deuce lover Senior Member Join Date: May 2010 Location: Southern France Posts: 5,306	Re: Wheel ID please Not Ford wheels.Spoke design and hub design is different.Plymouth has smaller bolt pattern.

04-08-2012, 06:16 PM	#6
Manuel Senior Member Join Date: May 2010 Location: ACT Australia Posts: 506	Re: Wheel ID please Sponsored Links (Register now to hide all advertisements) I can not see clearly from here but do the spokes come thru the rim and look like nail heads? A description of 17" Dodge/Ply wire wheels: 36 spokes in 2 sizes--3" and 5". 5 stud holes and 1 smaller extra hole. 5 x 4.5" bolt circle. Rear inner hub dia 9.5" HTH Manuel in Oz