|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
09-08-2017, 08:06 PM | #1 |
Senior Member
Join Date: May 2010
Location: ontario canada
Posts: 128
|
1934 vacuum control valve columbia
hi i have a 1934 roaster with a columbia axle i am looking for the vacuum control valve that is worked by the clutch or if someone has something that will work thanks mike
|
09-08-2017, 08:36 PM | #2 |
Senior Member
Join Date: Dec 2014
Location: Upper Peninsula, Michigan
Posts: 604
|
Re: 1934 vacuum control valve columbia
John Connelly at Columbia Two Speed Axle in California will have it for u. Reproduction but good.
|
Sponsored Links (Register now to hide all advertisements) |
|
09-08-2017, 08:36 PM | #3 |
Senior Member
Join Date: Apr 2013
Location: Virginia Beach, VA
Posts: 345
|
Re: 1934 vacuum control valve columbia
Contact John at Columbia Two Speed Parts, he has everything you need. If the 34 Roadster is the same as the 36 Roadster you will have to shorten the rod for the selector valve mounted on the dash as the dash is approximately 1" closer to the firewall than the closed cars. http://www.columbiatwospeedparts.com/ Hope this helps.
Sent from my iPad using Tapatalk |
09-08-2017, 10:11 PM | #4 |
Senior Member
Join Date: May 2010
Location: ontario canada
Posts: 128
|
Re: 1934 vacuum control valve columbia
well you can only buy the hole thing witch is 1300 but you get all the vacuum parts i only need the valve have rebuilt the rest of the vacuum parts can only buy the 35-36 one from john
|
09-08-2017, 11:12 PM | #5 | |
Senior Member
Join Date: Apr 2013
Location: Virginia Beach, VA
Posts: 345
|
Re: 1934 vacuum control valve columbia
Quote:
You might want to call and see, John has worked with me in the past and sold me only the parts I have needed. You might also be able to use the 35/36 pedal valve if you are willing to run something not 100% original. I would check for compatibility as it's not a cheap part. Sent from my iPad using Tapatalk |
|
09-09-2017, 08:55 AM | #6 |
Senior Member
Join Date: May 2010
Location: ontario canada
Posts: 128
|
Re: 1934 vacuum control valve columbia
Sponsored Links (Register now to hide all advertisements)
|
09-09-2017, 11:06 AM | #7 | |
Senior Member
Join Date: Apr 2013
Location: Virginia Beach, VA
Posts: 345
|
Re: 1934 vacuum control valve columbia
Quote:
Good luck in your quest. Sent from my iPad using Tapatalk |
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|