|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
07-23-2021, 01:36 AM | #1 |
Senior Member
Join Date: Jul 2021
Location: Walworth, New York
Posts: 138
|
REQUEST FOR INFO: What are the make, model, and specifications of this aluminum head?
Can someone help us figure out what is the make, model, and specifications of this aluminum cylinder head? From what I understand, it could be for an aircraft of some kind. The compression for the four cylinders ranged from 70.0 to 73.5 psi which makes me suspect that it is a around a 5.5 to 1 compression ratio? Maybe more? A cursory look at the head revealed a couple of markings, one that simply says "19," and a second one that is the registration symbol a circle around an "R". There are probably more markings, but at this point, I don't know what I am looking for.
If you can help us out, it would be greatly appreciated. Last edited by philcobill; 07-23-2021 at 07:48 PM. Reason: Corrected some wording |
07-23-2021, 05:15 PM | #2 |
Senior Member
Join Date: May 2010
Location: Clinton,WA/Whidbey Island
Posts: 4,104
|
Re: REQUESt FOR INFO: What are the make, model, and specifications of this aluminum h
they did make some Aluminum Model T Heads! Model A not sure!
__________________
www.whidbeymodelaclub.com |
Sponsored Links (Register now to hide all advertisements) |
|
07-24-2021, 06:55 AM | #3 |
Senior Member
Join Date: Jul 2018
Location: Spring Grove, Illinois
Posts: 1,371
|
Re: REQUEST FOR INFO: What are the make, model, and specifications of this aluminum h
What makes you think it is aluminum? Did you check with a magnet? Just wondering.
__________________
"The more things change, the more they stay the same." |
07-24-2021, 08:08 AM | #4 | |
Senior Member
Join Date: May 2010
Location: Eastern Tennessee
Posts: 11,513
|
Re: REQUEST FOR INFO: What are the make, model, and specifications of this aluminum h
Quote:
Realistically, you cannot tell a lot until you see the combustion chamber where you can compare it to others whom we know the manufacturer and what their chamber looked like. As far as aero inspired, maybe but probably not. Most powerplants that I have seen of homebuilt planes (Peitenpol, etc.) all used stock heads because of the budget. Granted there were exceptions. I have a Funk head that is alloy however it has around 4½ compression ratio and was set-up for an inverted engine. I would guess your head was probably made by someone like Dan Iandola back in the 60s or 70s. Again, you really need to see the combustion chamber design to have a better idea. Until then, go enjoy. |
|
07-24-2021, 10:27 AM | #5 |
Senior Member
Join Date: Jul 2021
Location: Walworth, New York
Posts: 138
|
Re: REQUEST FOR INFO: What are the make, model, and specifications of this aluminum h
Yes, my model A mechanic friend had a lamp for working on the engine which has a magnet on the end opposite of the light. He could not get it to stick to the cylinder head. And we looked more closely at the metal under the paint (which is not sticking well) and it is the color you would expect from aluminum. If it is not aluminum, it is certainly a non-magnetic metal (But it makes more sense to be aluminum.
|
07-24-2021, 06:26 PM | #6 |
Senior Member
Join Date: Jul 2018
Location: Spring Grove, Illinois
Posts: 1,371
|
Re: REQUEST FOR INFO: What are the make, model, and specifications of this aluminum h
Sponsored Links (Register now to hide all advertisements)
__________________
"The more things change, the more they stay the same." |
07-24-2021, 11:04 PM | #7 |
Senior Member
Join Date: May 2012
Location: Queensland, Australia
Posts: 10,366
|
Re: REQUEST FOR INFO: What are the make, model, and specifications of this aluminum h
Information wanted on this Aluminium Head on this Model A Ford. |
07-25-2021, 02:54 AM | #8 |
Senior Member
Join Date: Jul 2021
Location: Walworth, New York
Posts: 138
|
Re: REQUEST FOR INFO: What are the make, model, and specifications of this aluminum h
The head does not leak, so I am loathe to take it off just to find out what kind of head it is. So, as long as there is no issue with the head, especially no leaking, I won't take it off. Until it comes off....
|
07-28-2021, 04:11 PM | #9 |
Senior Member
Join Date: May 2017
Location: Huntington Beach, Calif
Posts: 330
|
Re: REQUEST FOR INFO: What are the make, model, and specifications of this aluminum h
Good plan!
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|