Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 03-09-2021, 07:54 AM   #1
Desoto291Hemi
Senior Member
 
Join Date: Oct 2019
Location: Carthage , Tennessee
Posts: 199
Default Flathead radiator with straight water

I know I am not that bright .
I read a lot of posts here where you should put straight water in the radiator with no antifreeze during a test .
Why ?

I have seen several pics here where the Block had a chunk the size of your fist pushed out ,,or a crack running the length of the pan rail or some other disastrous outcome from freezing .

I can understand doing for a short test,,,,,,but looks like too many are forgetting and leaving the water in without mixing in antifreeze .

What is wrong with putting some antifreeze in while doing a test .
If it is cracked already,,,,,the antifreeze won’t hurt any thing more than is already hurt ?

Just curious !

Tommy
Desoto291Hemi is offline   Reply With Quote
Old 03-09-2021, 08:39 AM   #2
tubman
Senior Member
 
tubman's Avatar
 
Join Date: Dec 2013
Location: Minnesota, Florida Keys
Posts: 10,259
Default Re: Flathead radiator with straight water

If you do have a leak during a test (initial) run, plain water makes less of a mess to clean up than an antifreeze mix.

Just don't forget to change it when everything proves OK.
tubman is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 03-09-2021, 09:25 AM   #3
Mart
Senior Member
 
Mart's Avatar
 
Join Date: May 2010
Location: Solihull, England.
Posts: 8,732
Default Re: Flathead radiator with straight water

I'm preparing a motor for a test at the moment and was going to use straight water. I changed my mind while filling it and went with antifreeze mix.

Mart.
Mart is offline   Reply With Quote
Old 03-09-2021, 09:30 AM   #4
tubman
Senior Member
 
tubman's Avatar
 
Join Date: Dec 2013
Location: Minnesota, Florida Keys
Posts: 10,259
Default Re: Flathead radiator with straight water

Just curious Mart; can you explain why you changed your mind?
tubman is offline   Reply With Quote
Old 03-09-2021, 09:53 AM   #5
19Fordy
Senior Member
 
19Fordy's Avatar
 
Join Date: May 2010
Location: Coral Springs FL
Posts: 10,872
Default Re: Flathead radiator with straight water

It may be that there is a dye that folks ad to the "straight water" that makes it easier to see a crack or defect?
19Fordy is offline   Reply With Quote
Old 03-09-2021, 09:58 AM   #6
51 MERC-CT
Senior Member
 
51 MERC-CT's Avatar
 
Join Date: May 2010
Location: East Hartford, Ct
Posts: 5,898
Default Re: Flathead radiator with straight water

Sponsored Links (Register now to hide all advertisements)
Quote:
Originally Posted by 19Fordy View Post
It may be that there is a dye that folks ad to the "straight water" that makes it easier to see a crack or defect?
No special dye, just plain food coloring will do the trick if needed.

And in a color of your choice.
__________________
DON'T RECALL DOING SOMETHING FOR MYSELF BASED ON SOMEONE ELSE'S LIKES OR DISLIKES
51 MERC-CT is offline   Reply With Quote
Old 03-09-2021, 11:16 AM   #7
Mart
Senior Member
 
Mart's Avatar
 
Join Date: May 2010
Location: Solihull, England.
Posts: 8,732
Default Re: Flathead radiator with straight water

Quote:
Originally Posted by tubman View Post
Just curious Mart; can you explain why you changed your mind?
It can still get cold at night here, and I was thinking the water pumps might benefit from lube qualities. No hard and fast reason, I just wavered between the two and came down on the side of adding the anti-freeze. I always run antifreeze anyway, so I thought I might start off as I intend to go on.

Mart.
Mart is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 06:34 AM.