|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
|
10-01-2020, 08:21 AM | #1 |
Senior Member
Join Date: Apr 2016
Location: St Clair, Michigan
Posts: 395
|
Radiator shroud emblem removal
Stupid question but how do I remove the emblem on the shroud?
I want to try and keep it intact and re-install after I clean it up.
__________________
Isaiah B. 1928 all metal Tudor |
10-01-2020, 08:36 AM | #2 |
Senior Member
Join Date: Mar 2017
Location: Connecticut Shoreline
Posts: 1,824
|
Re: Radiator shroud emblem removal
Just tap it from the back.
You might want to put some oil on it before hand and let it sit. Looks rusty. Light tap putting the handle end of a large screw driver against emblem. Replacements are not as good. Enjoy. |
Sponsored Links (Register now to hide all advertisements) |
|
10-01-2020, 08:40 AM | #3 |
Senior Member
Join Date: Apr 2016
Location: St Clair, Michigan
Posts: 395
|
Re: Radiator shroud emblem removal
Thanks so much! I thought it unscrewed somehow.
__________________
Isaiah B. 1928 all metal Tudor |
10-01-2020, 09:03 AM | #4 |
Senior Member
Join Date: Mar 2020
Posts: 150
|
Re: Radiator shroud emblem removal
I used a socket that was sized to the hole. Worked well.
|
10-01-2020, 09:56 AM | #5 |
Senior Member
Join Date: Jun 2015
Location: Red Deer, Alberta
Posts: 5,046
|
Re: Radiator shroud emblem removal
Is it just glued on? Or?
__________________
If you don't hear a rumor by 10 AM, start one!. Got my education out behind the barn! |
10-01-2020, 11:32 AM | #6 |
Senior Member
Join Date: May 2010
Location: Bismarck ND
Posts: 1,189
|
Re: Radiator shroud emblem removal
Sponsored Links (Register now to hide all advertisements)
|
10-02-2020, 10:25 AM | #7 |
Senior Member
Join Date: Jul 2010
Location: Pennsylvania
Posts: 1,100
|
Re: Radiator shroud emblem removal
What would you guys recommend if the emblem is too loose a fit in the radiator? It there a way to flare out the ring on the back of the emblem a little? Or maybe just a little silicone?
|
10-02-2020, 12:12 PM | #8 |
Senior Member
Join Date: May 2010
Location: brentwood, ca
Posts: 4,246
|
Re: Radiator shroud emblem removal
The cup will detach if you fuss with it very much. Epoxy has worked fo me.
|
10-02-2020, 01:56 PM | #9 |
Senior Member
Join Date: May 2010
Location: albany
Posts: 466
|
Re: Radiator shroud emblem removal
Ive seen them lightly spot welded cup to shell
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|