The Ford Barn

luvmyclassics · 10-26-2021, 05:41 AM

I need to replace my truck bed and rear fenders on my 51 f1. Could someone recommend a vendor for these parts? Thanks in advance.

TJ · 10-26-2021, 09:56 AM

The bed is reproduced, so check around your area for vendors who sell V-8 parts. Since you are in Florida it's possible that Macs(Ecklers) has the bed. You may find the fenders in fiberglass, but if you want steel you will have to find them used or maybe NOS. Try Dennis Carpenter

FortyNiner · 10-26-2021, 10:11 AM

The steel fenders are all produced by Dennis Carpenter, to my knowledge. There are a number of houses that resell them so shop around as freight will be an issue.

A couple of quality choices for beds:
https://mack-products.com/2017/12/ford/

https://www.mar-k.com/

fifty-one f-1 · 10-26-2021, 06:37 PM

I bought my box parts for my 51 ford from Bruce Horkey wood and parts. He is located in Windom Minnesota. www.horkeyswoodandparts.com, 507-831-5625. Get his catalog, see what you think. I always had good luck with his products, and he is good to deal with.

alanwoodieman · 10-26-2021, 09:17 PM

Sponsored Links (Register now to hide all advertisements)

if your original bed has flat side then carpenter reproduces the fenders for them. earlier beds had a raised sides and the fenders do not fit flat to the side. beds are reproduced==LMC-Mac's (eklers) brothers trucks and more sell them

10-26-2021, 05:41 AM	#1
luvmyclassics Senior Member Join Date: Jan 2011 Location: The Villages, FL Posts: 193	Truck Bed and Rear Fenders I need to replace my truck bed and rear fenders on my 51 f1. Could someone recommend a vendor for these parts? Thanks in advance.

10-26-2021, 09:56 AM	#2
TJ Senior Member Join Date: May 2010 Location: Napa,California Posts: 6,035	Re: Truck Bed and Rear Fenders The bed is reproduced, so check around your area for vendors who sell V-8 parts. Since you are in Florida it's possible that Macs(Ecklers) has the bed. You may find the fenders in fiberglass, but if you want steel you will have to find them used or maybe NOS. Try Dennis Carpenter

10-26-2021, 10:11 AM	#3
FortyNiner Senior Member Join Date: May 2012 Location: u-rah-rah-Wisconsin Posts: 1,136	Re: Truck Bed and Rear Fenders The steel fenders are all produced by Dennis Carpenter, to my knowledge. There are a number of houses that resell them so shop around as freight will be an issue. A couple of quality choices for beds: https://mack-products.com/2017/12/ford/ https://www.mar-k.com/ __________________ 19 and 49 F1 - jes' like Henry II built 1946 Deluxe - as Henry built it

10-26-2021, 06:37 PM	#4
fifty-one f-1 Member Join Date: Feb 2021 Location: minnesota Posts: 40	Re: Truck Bed and Rear Fenders I bought my box parts for my 51 ford from Bruce Horkey wood and parts. He is located in Windom Minnesota. www.horkeyswoodandparts.com, 507-831-5625. Get his catalog, see what you think. I always had good luck with his products, and he is good to deal with.

10-26-2021, 09:17 PM	#5
alanwoodieman Senior Member Join Date: May 2010 Location: upstate SC Posts: 2,963	Re: Truck Bed and Rear Fenders Sponsored Links (Register now to hide all advertisements) if your original bed has flat side then carpenter reproduces the fenders for them. earlier beds had a raised sides and the fenders do not fit flat to the side. beds are reproduced==LMC-Mac's (eklers) brothers trucks and more sell them