The Ford Barn

Maclab58 · 10-12-2017, 02:43 AM

I am having an intermittent problem with pop out the switch on my 31 cabriolet. Recently I began to have issues when putting the key in the ignition seems like Ian's are falling down and I cannot put the key all the way in the switch. I can use a dental instrument and lift up The pins and then slide the key in. I have use graphite spray in the keyhole without much success. Any suggestions? I have never taken one of these apart and I would like to preserve this one as it is original To the car.

10-12-2017, 02:43 AM	#1
Maclab58 Senior Member Join Date: Jul 2010 Location: Wichita Falls, Texas Posts: 983	Pop out switch problem I am having an intermittent problem with pop out the switch on my 31 cabriolet. Recently I began to have issues when putting the key in the ignition seems like Ian's are falling down and I cannot put the key all the way in the switch. I can use a dental instrument and lift up The pins and then slide the key in. I have use graphite spray in the keyhole without much success. Any suggestions? I have never taken one of these apart and I would like to preserve this one as it is original To the car.