|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
05-30-2014, 02:56 PM | #1 |
Senior Member
Join Date: May 2010
Location: Regina Canada
Posts: 1,335
|
cam ideas for fuel injected flatty
What would be a recommended cam for a 276 flatty with fuel injection. going into a 50 Ford pickup Thanks Bill
|
05-30-2014, 03:14 PM | #2 |
Senior Member
Join Date: May 2010
Location: Southern Illinois
Posts: 3,795
|
Re: cam ideas for fuel injected flatty
I can't help you with the question but please post photo's of that project when done. I'd really enjoy looking at that!
|
Sponsored Links (Register now to hide all advertisements) |
|
05-30-2014, 03:37 PM | #3 |
Senior Member
Join Date: May 2010
Location: Regina Canada
Posts: 1,335
|
Re: cam ideas for fuel injected flatty
I will be just building the shortblock then shipping to customer. I am rather interested as to what they will do as well.
|
05-30-2014, 04:13 PM | #4 |
Senior Member
Join Date: Jul 2010
Posts: 2,593
|
Re: cam ideas for fuel injected flatty
Intended use?
What sort of injection? Trans? Axle ratio? tyre size? Genuine final expectation? Lopey idle but smooth driving? Smooth idle? Just after sound? I could go on, you need all the possible information, to recommend a cam. No amount of info is to much. Without enough info, you might aswell wright the name of every known cam on a sheet of paper and Chuck a dart at it. Martin. |
05-30-2014, 05:45 PM | #5 |
Senior Member
Join Date: May 2010
Location: SPEEDWAY INDIANA
Posts: 4,148
|
Re: cam ideas for fuel injected flatty
Pretty simple question would be why is it being injected ??? Then you will know the cam needed.
Jim Linder Fuel Injection www.lindertech.com www.bubbashotrodshop.com |
05-31-2014, 08:33 PM | #6 |
Senior Member
Join Date: May 2010
Location: Tehachapi, CA
Posts: 361
|
Re: cam ideas for fuel injected flatty
Sponsored Links (Register now to hide all advertisements)
Vergil
__________________
Bigger fonts to aid in reading |
06-01-2014, 05:07 AM | #7 |
Senior Member
Join Date: Jul 2010
Posts: 2,593
|
Re: cam ideas for fuel injected flatty
Bubba, if only it was that easy. But it ain't, you need all the info you can get to recommend the right cam.
That would be like you just building all sbc-Flathead ignitions with the same advance curve irrespective of the questions I mentioned. A properly selected cam can make the difference in the same way a properly tailored advance curve. Martin. |
|
|
Sponsored Links (Register now to hide all advertisements) |
|