Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 01-17-2015, 01:58 PM   #1
Carb Guy
Senior Member
 
Carb Guy's Avatar
 
Join Date: May 2010
Location: Wisconsin
Posts: 186
Default Message To Tom Wesenberg

I am sorry Tom that I did not see your message around Christmas time until today. I do not work on other carburetors so I am not able to help You. I sure wish I could help you because you have helped me several times and so many others on this site. Thanks again.

Dick Hansen
Carb Guy is offline   Reply With Quote
Old 01-17-2015, 03:45 PM   #2
Tom Wesenberg
Senior Member
 
Tom Wesenberg's Avatar
 
Join Date: May 2010
Location: Mpls, MN
Posts: 27,582
Default Re: Message To Tom Wesenberg

I had the carb apart at least 6 times and never could find a thing wrong with it. Maybe one of the gaskets was dry and hard from setting around unused for most of 20 years. Anyway I filled the carb with gas and propped it over a bucker in the kitchen sink for 24 hours and it never lost a drop of gas, so hopefully it's OK now.
Tom Wesenberg is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 01-17-2015, 03:50 PM   #3
Carb Guy
Senior Member
 
Carb Guy's Avatar
 
Join Date: May 2010
Location: Wisconsin
Posts: 186
Default Re: Message To Tom Wesenberg

Sponsored Links (Register now to hide all advertisements)
Tom: Glad to here that it is now working well. Thanks.

Dick H.
Carb Guy is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 02:52 PM.