|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
04-01-2023, 07:15 AM | #1 |
Senior Member
Join Date: May 2010
Posts: 2,214
|
1956 T Bird Power booster hockup
Hi Guys I purchased a rebuilt original power booster for my 1956 T bird. this is the one that bolts to the inside drivers side inner fender adjacent to the engine. The car is all original other than I currently have disc brakes on the front with a gm dual master cylinder. Can some one tell me how this unit should be hooked up. A couple of photos would also be appreciated thanks Tom
|
04-01-2023, 12:28 PM | #2 |
Member
Join Date: Feb 2014
Location: St Paul MN
Posts: 36
|
Re: 1956 T Bird Power booster hockup
From what I have been able to find, the booster is hooked up to the front discs only. To balance the braking without a proportioning valve the rear brake wheel cylinders are replaced with 55 T-Bird wheel cylinders, which have a 7/8" diameter. The 56 has 15/16" diameter wheel cylinders. I haven't done this myself but was looking into it for my 56 Bird.
|
Sponsored Links (Register now to hide all advertisements) |
|
04-01-2023, 01:12 PM | #3 |
Senior Member
Join Date: May 2010
Location: Midland Park, NJ
Posts: 3,982
|
Re: 1956 T Bird Power booster hockup
Sponsored Links (Register now to hide all advertisements)
__________________
48 Ford Conv 56 Tbird 54 Ford Victoria |
|
|
Sponsored Links (Register now to hide all advertisements) |
|