The Ford Barn

C1Nelson · 04-28-2022, 07:19 PM

I have one of the Spin On Oil Filter kits on a motor I will be putting in my CCPU project. I also found an adaptor to change the filter from a horizontal position to a vertical position. The adaptor is a Ford oil filter mount #97JM6884AA. I know others have used this adaptor.

The adaptor screws on to the motor using a bolt that is the same size as the nipple on the valve cover.

Can someone tell me if the nipple on the valve cover can be removed?

John · 04-28-2022, 07:49 PM

Sponsored Links (Register now to hide all advertisements)

Yes, the pipe nipple unscrews on the ones I have seen.

john Cannon

04-28-2022, 07:19 PM	#1
C1Nelson Member Join Date: Aug 2014 Location: Nampa, Idaho Posts: 61	Spin on oil filter I have one of the Spin On Oil Filter kits on a motor I will be putting in my CCPU project. I also found an adaptor to change the filter from a horizontal position to a vertical position. The adaptor is a Ford oil filter mount #97JM6884AA. I know others have used this adaptor. The adaptor screws on to the motor using a bolt that is the same size as the nipple on the valve cover. Can someone tell me if the nipple on the valve cover can be removed?

04-28-2022, 07:49 PM	#2
John Senior Member Join Date: May 2010 Location: Richmond, VA Posts: 189	Re: Spin on oil filter Sponsored Links (Register now to hide all advertisements) Yes, the pipe nipple unscrews on the ones I have seen. john Cannon