Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 03-22-2011, 10:55 AM   #1
'29wagon
Senior Member
 
Join Date: May 2010
Location: H.B. California
Posts: 451
Default stationwagon cargobay question

i've not looked close enough yet and when i received my '29 everything was loose, now it's dismantled.
in looking at many photos shot at the rear i notice the floor at the inside rear fender is tapered.
i've been under the assumption that those fenders will fall into place by paralleling the frame extension "z" channels (if they are called that), paralleling them with each other. or am i seeing it wrong and the channel tapers to follow the frame .
if there is a willing folk to enlighten me on this. much appreciated .
'29wagon is offline   Reply With Quote
Old 04-11-2011, 07:04 PM   #2
Woody Willy
Junior Member
 
Join Date: May 2010
Posts: 22
Default Re: stationwagon cargobay question

Sponsored Links (Register now to hide all advertisements)
Hi,
I think I can help, there is an offset of about a 1/4" on the "Z" bars. This also makes the rails of the floor supports and the floor itself to adjust for this offset. If you would like some information about the "Z" bars or drawings, I would be happy to help. You can call me on the East Coast at 321.454.4490 and I can sent the info to you. Keeping the hobby alive for the next generation.
Regards,
Bill Huminski
Woody Willy is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 05:38 AM.