|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
02-18-2011, 10:35 AM | #1 |
Junior Member
Join Date: May 2010
Posts: 22
|
Model A Wishbone
I have a bent wishbone that is not severe and was thinking of trying to bend it back either cold or by heating and returning it to shape. I have read that this may not be the best thing to do. I have a '32 axle assembly with a straight wishbow that appears to be the same size, can I or has anybody changed out a Model A for a '32? Looking for help in Sunny Florida.
Regards, Bill H. |
02-18-2011, 10:45 AM | #2 |
Senior Member
Join Date: May 2010
Location: Eastern Tennessee
Posts: 11,519
|
Re: Model A Wishbone
You can straighten a front radius rod (wishbone) using heat and shrinking. The metal is very substantial and heat is not going to adversely affect it.
|
Sponsored Links (Register now to hide all advertisements) |
|
02-18-2011, 11:26 AM | #3 |
Senior Member
Join Date: May 2010
Location: Fresno, Ca.
Posts: 3,636
|
Re: Model A Wishbone
Sponsored Links (Register now to hide all advertisements)
If you have a 32 radius rod that appears to be the same as an A, then it's not a 32. |
|
|
Sponsored Links (Register now to hide all advertisements) |
|