|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
02-28-2017, 01:24 PM | #1 |
Senior Member
Join Date: May 2010
Location: Coral Springs FL
Posts: 10,950
|
Installing "Anti- Chatter" rods on an 8BA
It can be done by welding 1/2 inch thick steel ears to the pressed steel bellhousing and lengthening the original rods by welding in a piece of the same dia. steel rod. Make sure brake and clutch pedals will "clear" the rods when depressing pedals. Purists, be sure and use OEM bolts.
Last edited by 19Fordy; 02-28-2017 at 01:34 PM. |
02-28-2017, 04:24 PM | #2 |
Senior Member
Join Date: Jun 2010
Location: San Antonio, Texas
Posts: 16,436
|
Re: Installing "Anti- Chatter" rods on an 8BA
Sponsored Links (Register now to hide all advertisements)
|
Sponsored Links (Register now to hide all advertisements) |
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|