|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
08-07-2022, 01:14 PM | #1 |
BANNED
Join Date: May 2010
Posts: 3,019
|
1/2 - 20 repair fitting
I need a source or pt # for the repair fittings that I find in core carbs that
find their way into my stash. The male end has 1/2-20 threads and seals with a gasket against the inlet . The female end accepts 1/4 tube , ferrule and 1/2-20 Ford nut. I use these fittings to salvage 94 air horns where the ferrule seat is no longer concentric enough to be leak proof. I'm running low ! Charlie ny |
08-08-2022, 05:46 AM | #2 |
Member
Join Date: Nov 2013
Location: Cincinnati, Ohio
Posts: 40
|
Re: 1/2 - 20 repair fitting
Charlie, is this what you need? I’m not sure if the inlet side of this one is made for a Fordnut or flared line. Worth a look.
https://www.carburetor-parts.com/Bra...80_p_2408.html Joe |
Sponsored Links (Register now to hide all advertisements) |
|
08-08-2022, 08:17 AM | #3 |
BANNED
Join Date: May 2010
Posts: 3,019
|
Re: 1/2 - 20 repair fitting
HB,
I'll give mike a jingle and see if he has them for Ford nut....the inlet on the one in photo is for flared. Thanks, Charlie |
08-08-2022, 11:08 AM | #4 |
Senior Member
Join Date: Aug 2010
Location: McMinnville, TN
Posts: 2,327
|
Re: 1/2 - 20 repair fitting
Deleted
Last edited by 35fordtn; 08-08-2022 at 11:17 AM. |
08-08-2022, 11:21 AM | #5 |
Senior Member
Join Date: Jun 2010
Location: Detroit suburb, MI
Posts: 3,706
|
Re: 1/2 - 20 repair fitting
|
08-08-2022, 12:29 PM | #6 |
BANNED
Join Date: May 2010
Posts: 3,019
|
Re: 1/2 - 20 repair fitting
Sponsored Links (Register now to hide all advertisements)
Don't go too far...do you have any ?.....Mike's came up dry. Charlie ny |
08-08-2022, 01:19 PM | #7 |
Senior Member
Join Date: May 2010
Location: so cal, placerville, vegas
Posts: 1,394
|
Re: 1/2 - 20 repair fitting
I am thinking that Max had (or has) this sort of stuff. Try Max?
Post #2 seems to have what I think you are asking. |
08-08-2022, 02:41 PM | #8 |
Senior Member
Join Date: May 2010
Location: Tinley Park Ill
Posts: 1,062
|
Re: 1/2 - 20 repair fitting
Weatherhead 59X4 look them up on the internet.
|
08-08-2022, 03:26 PM | #9 |
Senior Member
Join Date: Sep 2021
Location: summerton, sc
Posts: 353
|
Re: 1/2 - 20 repair fitting
1/2-20x8an fuel inlet adapter fitting, quadrajet parts.com
kurt |
08-08-2022, 08:24 PM | #10 |
Member
Join Date: Feb 2013
Location: Rancho Cordova, Ca.
Posts: 56
|
Re: 1/2 - 20 repair fitting
https://www.vintageford.com/global_s...0507&Category=
FUEL LINE BRASS FITTING WITH FERRULE 1/2 INCH HEAD 1/2-20 FUEL LINE BRASS FITTING LARGER 9/16 INCH HEAD 1/2-20unf |
08-08-2022, 08:25 PM | #11 |
Member
Join Date: Feb 2013
Location: Rancho Cordova, Ca.
Posts: 56
|
Re: 1/2 - 20 repair fitting
For 1/4" line...
|
08-09-2022, 06:50 PM | #12 |
Senior Member
Join Date: Aug 2010
Location: McMinnville, TN
Posts: 2,327
|
Re: 1/2 - 20 repair fitting
Charlie I deleted my comment as I had a solution that had apparently dried up… I have none. Check with James at Gotham auto parts.
|
08-09-2022, 08:11 PM | #13 |
Senior Member
Join Date: Jan 2011
Location: sw minnesota
Posts: 4,578
|
Re: 1/2 - 20 repair fitting
Same as a model A fuel line. Brattons antique auto has them...or did
|
08-09-2022, 08:47 PM | #14 | |
Senior Member
Join Date: Aug 2010
Location: McMinnville, TN
Posts: 2,327
|
Re: 1/2 - 20 repair fitting
Quote:
Charlie isn’t looking for the fittings shown they are readily available, heck we even have made them for the model a vendors. |
|
08-09-2022, 08:49 PM | #15 |
Senior Member
Join Date: Aug 2010
Location: McMinnville, TN
Posts: 2,327
|
Re: 1/2 - 20 repair fitting
Charlie I can get them but they are for a flared line not a ferulle
|
08-10-2022, 06:57 AM | #16 |
BANNED
Join Date: May 2010
Posts: 3,019
|
Re: 1/2 - 20 repair fitting
Michael....thanks.
Charlie ny |
08-10-2022, 08:12 AM | #17 |
Senior Member
Join Date: May 2010
Location: Solihull, England.
Posts: 8,755
|
Re: 1/2 - 20 repair fitting
What would it take to take one of the available flair fittings and remachine the seat to take a 1/4 pipe ferrule?
|
08-10-2022, 08:23 AM | #18 |
Senior Member
Join Date: Aug 2010
Location: McMinnville, TN
Posts: 2,327
|
Re: 1/2 - 20 repair fitting
|
08-10-2022, 04:39 PM | #19 |
Senior Member
Join Date: Jun 2010
Location: San Antonio, Texas
Posts: 16,440
|
Re: 1/2 - 20 repair fitting
Weatherhead went to Eaton. They may have manufactured stuff like that back in the day. A person would have to an old catalog to find out. If there is a part number then a person may be able to find them.
|
08-10-2022, 06:51 PM | #20 |
BANNED
Join Date: May 2010
Posts: 3,019
|
Re: 1/2 - 20 repair fitting
Mart,
I'm working on it now...to keep 100% concentricity between the seat and threads is more than plunging a countersink into the flare contour. Charlie ny |
|
|
Sponsored Links (Register now to hide all advertisements) |
|