The Ford Barn

Brent · 11-13-2014, 07:04 PM

Hey folks,

Like the title says, I'd like 2 decent 1931 Model A splash aprons. A little surface rust over paint would be great.

OR

2 decent apron extensions, that is, the part that goes into the fender. Each side, obviously.

This is for a project I've got brewing.

Thanks!

Brent

Brent · 11-24-2014, 02:21 PM

Bump.

The holidays are here folks... make some spending money.

Brent · 12-01-2014, 05:14 PM

Sponsored Links (Register now to hide all advertisements)

$ has been sent to grumpyoldsman.

Thanks Ford Barn!

11-13-2014, 07:04 PM	#1
Brent Senior Member Join Date: May 2010 Location: Salt Lake City Posts: 141	Wanted: 1931 Splash Aprons or 1930 Apron Extensions (the part in the fender) City: Salt Lake City State: UT Hey folks, Like the title says, I'd like 2 decent 1931 Model A splash aprons. A little surface rust over paint would be great. OR 2 decent apron extensions, that is, the part that goes into the fender. Each side, obviously. This is for a project I've got brewing. Thanks! Brent Last edited by Brent; 11-13-2014 at 07:12 PM.

11-24-2014, 02:21 PM	#2
Brent Senior Member Join Date: May 2010 Location: Salt Lake City Posts: 141	Re: Wanted: 1931 Splash Aprons or 1930 Apron Extensions (the part in the fender) Bump. The holidays are here folks... make some spending money.

12-01-2014, 05:14 PM	#3
Brent Senior Member Join Date: May 2010 Location: Salt Lake City Posts: 141	Re: Wanted: 1931 Splash Aprons or 1930 Apron Extensions (the part in the fender) Sponsored Links (Register now to hide all advertisements) $ has been sent to grumpyoldsman. Thanks Ford Barn!