The Ford Barn

Ian NZ · 10-05-2017, 02:55 AM

I thought I might have a have a Sparton Model A horn rewound but the armature has a loose segment on it can that be repaired and rewound or am I better to try and locate another one. Does anyone know anything about these A & L Parts Specialties 6 volt horn motors, can they be fitted to the original Sparton horns.

Jon-Ohio · 10-05-2017, 01:08 PM

Yes they do fit original front horn projector bells - and are stamped either Sparton or Stewart Warner - powder coated black. Hopes this helps.

A & L email:
[email protected]

USA phone # - M-Th 8 to 5 ET and Fri 8-12pm ET
860-693-0112 or 860-693-2620

JohnLaVoy · 10-05-2017, 07:18 PM

Sponsored Links (Register now to hide all advertisements)

The A&L unit is a great fix for your horn. Their products are really top notch.

10-05-2017, 02:55 AM	#1
Ian NZ Senior Member Join Date: May 2010 Location: Taranaki, New Zealand Posts: 922	Model A Horn armature. I thought I might have a have a Sparton Model A horn rewound but the armature has a loose segment on it can that be repaired and rewound or am I better to try and locate another one. Does anyone know anything about these A & L Parts Specialties 6 volt horn motors, can they be fitted to the original Sparton horns.

10-05-2017, 01:08 PM	#2
Jon-Ohio Senior Member Join Date: May 2010 Posts: 191	Re: Model A Horn armature. Yes they do fit original front horn projector bells - and are stamped either Sparton or Stewart Warner - powder coated black. Hopes this helps. A & L email: [email protected] USA phone # - M-Th 8 to 5 ET and Fri 8-12pm ET 860-693-0112 or 860-693-2620

10-05-2017, 07:18 PM	#3
JohnLaVoy Senior Member Join Date: Jun 2014 Location: Rocklin, CA Posts: 779	Re: Model A Horn armature. Sponsored Links (Register now to hide all advertisements) The A&L unit is a great fix for your horn. Their products are really top notch.