06-25-2022, 03:56 PM | #1 |
Senior Member
Join Date: Aug 2017
Location: SoCal Desert
Posts: 826
|
New Goodies
Hello All,
I'm just about to install new valves, guides, springs and retainers. I really don't feel like spending money on assembly lube for a few parts. I would think such a product didn't exist back in the Model A days, so I was thinking of just using CRC Stay-Lube, Stay-Plex red grease, something I could imagine in the day, ... just grease. I also have babbitt bearings. Regards Bill |
06-25-2022, 05:08 PM | #2 |
Senior Member
Join Date: May 2010
Location: Jamestown, ND
Posts: 657
|
Re: New Goodies
How about some STP? It’s pretty cheap. Or Permatex 81950 Assembly Lube $5 or $6.
|
Sponsored Links (Register now to hide all advertisements) |
|
06-26-2022, 10:44 AM | #3 |
Senior Member
Join Date: Jun 2015
Location: Red Deer, Alberta
Posts: 5,046
|
Re: New Goodies
Gear oil works.
__________________
If you don't hear a rumor by 10 AM, start one!. Got my education out behind the barn! |
06-26-2022, 10:47 AM | #4 |
Senior Member
Join Date: May 2010
Location: Long Island, NY
Posts: 3,472
|
Re: New Goodies
Ditto STP
__________________
Bob Bidonde |
06-26-2022, 11:13 AM | #5 |
Senior Member
Join Date: Mar 2021
Location: Camarillo, Ca
Posts: 167
|
Re: New Goodies
All you need is an 8 oz bottle of assembly lube ----- $10 or so.
|
06-26-2022, 11:48 AM | #6 |
Senior Member
Join Date: May 2018
Location: Birch Bay WA
Posts: 190
|
Re: New Goodies
Sponsored Links (Register now to hide all advertisements)
Gerry, Birch Bay WA |
06-26-2022, 12:51 PM | #7 |
Senior Member
Join Date: May 2010
Location: Jamestown, ND
Posts: 657
|
Re: New Goodies
Here is what I use.
|
06-27-2022, 01:55 PM | #8 |
Senior Member
Join Date: May 2010
Location: Oregon
Posts: 1,289
|
Re: New Goodies
If assembly lube will work and something else does not... How much will the (not) assembly lube cost??? $7.00 seems like cheap insurance.
|
06-27-2022, 03:05 PM | #9 |
Senior Member
Join Date: Jul 2018
Location: Spring Grove, Illinois
Posts: 1,371
|
Re: New Goodies
Any oil will work fine. Assembly lube really isn't anything more special than any other lubricant unless you don't know what you are doing and set clearances way too tight all around.
__________________
"The more things change, the more they stay the same." |
06-27-2022, 03:43 PM | #10 |
Senior Member
Join Date: May 2010
Location: Jamestown, ND
Posts: 657
|
Re: New Goodies
|
06-27-2022, 05:31 PM | #11 |
Senior Member
Join Date: May 2010
Location: Longbranch, Washington
Posts: 513
|
Re: New Goodies
Although I'm a Model T engine & transmission builder, I pre-lube all internal parts with the same oil I recommend for running in the engine.
|
06-27-2022, 05:57 PM | #12 |
Senior Member
Join Date: Jun 2014
Location: Melbourne, Australia
Posts: 7,496
|
Re: New Goodies
That's all I do when I assemble an A engine.
__________________
I'm part of the only ever generation with an analogue childhood and a digital adulthood. |
06-27-2022, 06:03 PM | #13 |
Senior Member
Join Date: Dec 2014
Location: Germantown,TN
Posts: 517
|
Re: New Goodies
Lycoming recommends 50:50 mixture of engine oil and STP got their aircraft engines.
|
06-28-2022, 04:52 PM | #14 |
Senior Member
Join Date: May 2010
Location: Illinois
Posts: 2,185
|
Re: New Goodies
I always use it on engine rebuilds. If the engine sits for a while the lube does not run out. Also starting a new engine always has close tolerances and more heat.
Cam manufacturers always call for a breakin lube. John
__________________
Welcome each day |
06-29-2022, 12:08 AM | #15 |
Senior Member
Join Date: Dec 2014
Location: Shawnee, Ok
Posts: 3,471
|
Re: New Goodies
I agree with posts #9, 11 and 12
But if using assembly lube makes you feel better I say go for it
__________________
Keith Shawnee OK '31 SW 160-B |
06-29-2022, 09:48 AM | #16 | |
Senior Member
Join Date: Jun 2015
Location: Red Deer, Alberta
Posts: 5,046
|
Re: New Goodies
Quote:
FWIW, I've never worked on an engine that wasn't going to be used shortly after it was assembled.
__________________
If you don't hear a rumor by 10 AM, start one!. Got my education out behind the barn! |
|
06-29-2022, 10:25 AM | #17 |
Senior Member
Join Date: Feb 2011
Location: Lincoln, Nebraska
Posts: 1,910
|
Re: New Goodies
I use the Ultra-Slick as in post #7 but also mix a bit of engine oil in with it.
__________________
Dave / Lincoln Nebraska |
06-29-2022, 10:28 AM | #18 |
Senior Member
Join Date: Jan 2020
Location: SF Bay Area
Posts: 1,079
|
Re: New Goodies
Back when I was starting out in the '60s I was taught to use STP as my assembly lube for everything (STP stood for "Studebaker Tickled Pink", boy were we clever since Studebaker had just shut down). We even dipped head bolts in STP, which I believe we now realize is not good to do since most head bolt torques are with the studs dry. Nowadays there are certainly other assembly lubes such as the Permatex noted. I'd avoid heavy grease like the StaPlex red as it may occlude oil passages initially until it gets mixed with the circulating oil.
Besides, as someone posted earlier, what's another $10 for a new engine? Or, just use oil and run it in immediately. JayJay
__________________
JayJay San Francisco Bay Area ------------------------ 1930 Murray Town Sedan 1931 Briggs S/W Town Sedan |
06-30-2022, 10:08 AM | #19 |
Senior Member
Join Date: Jun 2015
Location: Red Deer, Alberta
Posts: 5,046
|
Re: New Goodies
I was taught that STP stands for: Sex Takes Practice.
__________________
If you don't hear a rumor by 10 AM, start one!. Got my education out behind the barn! |
|
|
Sponsored Links (Register now to hide all advertisements) |
|