1931 victoria garnish moldings

[gillis]

Hi is there anyone who has garnish moldings to a 1931 Victoria for sale or does someone knows if they is any reproduction of them ?

[Roadster62]

I passed on a very rough set at Hershey for $75.00, and may be able to find the sellers info. Bob

[Vern]

The window frames for a Victoria are not reproduced.
The "garnish" moldings that fit under the window frames of a Victoria are reproduced & available from the usual vendors.

[kelley's restoration]

which moldings do you need
tk

[SteveB31]

We have original Victoria window frames in stock and repro garnish moldings in stock.
Berts Model A Center 800-321-1931

[Vern]

Sponsored Links (Register now to hide all advertisements)

The "V" pointed garnish moldings that fit under the window frames for the Victoria are reproduced & available from the typcial vendors; Brattons, Snyders & Bert's all carry them.

The window frames are a different problem, as they are not reproduced. They show up occasionally at swap meets & on eBay. But they are expensive if they are decent and probably not easily found in Sweden.

I invite you to check out the Victoria Association, we are dedicated to the preservation & restoration of this Model A body type.
Regards,
Vern Schwebke, President
International Model A Victoria Association
[email protected]
www.VictoriaAssociation.com

[Shiny]

Hows it going?
We are looking for all 4 side window mouldings for a 31 Victoria.
Any leads appreciated.

-Shiny

[Bill Cilker]

Try Bert's in Colorado. See post 5