|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
|
04-02-2016, 03:44 PM | #1 |
Senior Member
Join Date: Aug 2012
Location: Houston Delaware
Posts: 202
|
Help with grease seal
I pulled my worm drive rear apart and I have found a felt grease seal that is damaged..This is a model a but it is a early 28 late February. It is the same as the tt rear Does anyone have a part number or know who may have 2 of these felt seal or even a replacement See attached pictures red arrow shows seal and other picture is my seal Thank You
|
04-02-2016, 04:22 PM | #2 |
Senior Member
Join Date: Nov 2011
Location: Sonoma, CA.
Posts: 1,498
|
Re: Help with grease seal
If you have a good bearing house near you or a good tractor place, take a measurement
of the housing I.D. and the Axle O.D. and the thickness of the seal and see if they can come up with a modern replacement seal. Sometimes you get lucky. (and sometimes you find a seal) |
Sponsored Links (Register now to hide all advertisements) |
|
04-02-2016, 05:31 PM | #3 |
Senior Member
Join Date: Jul 2012
Posts: 586
|
Re: Help with grease seal
Does it have a part number on it? Most seals are marked with a manufacture's number. If you find that a little sleuthing should allow you find them.
|
04-02-2016, 06:32 PM | #4 |
Senior Member
Join Date: Aug 2012
Location: Houston Delaware
Posts: 202
|
Re: Help with grease seal
The only markings I can find Is the ford script
|
04-02-2016, 08:41 PM | #5 |
Senior Member
Join Date: Jan 2011
Location: St Joseph,MN
Posts: 278
|
Re: Help with grease seal
This is the seal # 16303SA-H
__________________
'OSO HANDY RESTORATIONS Specializing in Model T Fords 320-293-1953 |
04-03-2016, 01:30 PM | #6 |
Senior Member
Join Date: Aug 2012
Location: Houston Delaware
Posts: 202
|
Re: Help with grease seal
Sponsored Links (Register now to hide all advertisements)
|
04-09-2016, 03:25 PM | #7 |
Senior Member
Join Date: Aug 2012
Location: Houston Delaware
Posts: 202
|
Re: Help with grease seal
Got my seals today Thank you Which way does in go in. Does the open side of the seal go toward the pinion or away from the pinion
|
04-09-2016, 07:58 PM | #8 |
Senior Member
Join Date: Aug 2012
Location: Houston Delaware
Posts: 202
|
Re: Help with grease seal
'OSO HANDY RESTORATIONS Thank you for the phone call . That was a great experience buying from you Fast shipping and great to talk to Thank you Billy
|
04-03-2016, 10:43 PM | #9 |
Senior Member
Join Date: Jan 2011
Location: St Joseph,MN
Posts: 278
|
Re: Help with grease seal
I have them in stock. alosoatq.com change at to the @
__________________
'OSO HANDY RESTORATIONS Specializing in Model T Fords 320-293-1953 |
|
|
Sponsored Links (Register now to hide all advertisements) |
|