![]() |
#1 |
Senior Member
Join Date: Jul 2017
Location: Eastern Oregon
Posts: 206
|
![]()
Howdy boys, I have my grandfathers F1 he bought new, serial number 88RY12420 (found on the left front frame rail near motor mount). I understand some 1/2 tons were stamped Y. I've tried to find the month it was built, but so far no luck. There is no plate on the glove box door. I can't find a number on the cab either, on the firewall under the seam. The engine I believe, is a '49 reman, due to the heads having the thermostat housing in the center, and the block is red in color. I understand most "truck" engines were blue at that time. The bell housing doesn't appear to have been painted. The transmission is blue. It has a rebuild tag on it from Tam Engineering, Bore -.040, Rods - .010, and Mains - .010. It ran when I got it 40+ years ago, I drove it for a couple years until I bought a new F250 in '78. So, is there a number on the block that can ID it as to the date it was built? Without the number on the cab, I can only guess at the original color, which I believe is green. It's pretty rusty, but there is plenty of green on it. I remember it being green when I was a kid, about 60 years ago. Thanks guys, always fun seeing your responses!
|
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: May 2012
Location: u-rah-rah-Wisconsin
Posts: 1,143
|
![]()
There wasn't any engine or block stampings regarding production.
If you have looked on the firewall just forward of the cowl vent for stamped or painted characters without success, then you're out of options. Those characters carry the production date, color code, and assembly plant code. The practice varied by plant with some trucks seemingly lacking anything. My '49 appears to be one of the unmarked. If the truck has a heater, the core typically has a date stencil. While not a birthday, it does get you a rough time line. The original glass should also have a date code. As for color, check under the dash and behind the seat. Often these places will carry the original paint even after a re-spray.
__________________
19 and 49 F1 - jes' like Henry II built 1946 Deluxe - as Henry built it |
![]() |
![]() |
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
#3 |
Senior Member
Join Date: Jul 2017
Location: Eastern Oregon
Posts: 206
|
![]()
Thanks FortyNiner, kinda what I figured. Didn't know about the heater and the windshield glass. I'll take a look. The glass is getting cut for the windows now, so I'll need to check it before it gets tossed out! So, any suggestions on the engine? The 239's, the way I understand it, had the outlet for the heads in the center, mine is on the forward end. Thank you sir!
|
![]() |
![]() |
![]() |
#4 |
Senior Member
Join Date: May 2010
Location: East Hartford, Ct
Posts: 5,898
|
![]()
1948 was (as I understand it ) the first year that Ford installed the 8BA series flathead with thermostat housings to the front of the heads into pickups.
1949 was when they installed the 8BA series in passenger vehicles. There may or may not be an engine date of manufacture code stamped on the right rear top of the intake manifold surface..
__________________
DON'T RECALL DOING SOMETHING FOR MYSELF BASED ON SOMEONE ELSE'S LIKES OR DISLIKES Last edited by 51 MERC-CT; 04-15-2023 at 07:12 PM. |
![]() |
![]() |
![]() |
#5 |
Senior Member
Join Date: May 2012
Location: u-rah-rah-Wisconsin
Posts: 1,143
|
![]()
This may help iD the engine: http://http://www.vanpeltsales.com/F...ifications.htm
__________________
19 and 49 F1 - jes' like Henry II built 1946 Deluxe - as Henry built it |
![]() |
![]() |
![]() |
#6 |
Senior Member
Join Date: Jun 2010
Location: San Antonio, Texas
Posts: 16,483
|
![]() Sponsored Links (Register now to hide all advertisements)
Ford stamped some codes into the firewall for F series bonus built trucks but not the VIN. Ford did put tags on the glove box lids but a lot of them are either missing or possibly not installed on 48 models but I can't say since more than one factory assembled them and Canadian built ones always have subtle differences. My Pop had several F1s, an F3, and an F6. They all had tags on the glove box lids. Ford used R to indicate the V8 and H for the 6 cylinder engines. Each different model of pickup, truck, or panel delivery was assigned an alpha code letter. Y was the 1- ton commercial known as the F3. The F1 was C and the F2 was D.. The code letters are explained in the chassis parts catalog for standard trucks below F7. The 59 series engines with the top enter coolant outlet were last used in production on the 1948 cars. Pickups were 8BA/8RT in the 1948 Bonus Builts. The 59 series will bolt in so it may have been swapped out but it's not original. V8 truck engines were red in 1948 if I remember correctly. Last edited by rotorwrench; 04-15-2023 at 09:56 PM. |
![]() |
![]() |
![]() |
#7 |
Senior Member
Join Date: Jul 2010
Location: 36 miles north of Albany NY
Posts: 2,963
|
![]()
Are there any date codes in the glass “glass bugs” the letters equate to the years, that may get you a little closer.
|
![]() |
![]() |
![]() |
#8 |
Senior Member
Join Date: Jul 2017
Location: Eastern Oregon
Posts: 206
|
![]()
Great responses guys, thanks! I have some investigating to do! I'll keep ya posted.
|
![]() |
![]() |
![]() |
#9 |
Senior Member
Join Date: Jul 2017
Location: Eastern Oregon
Posts: 206
|
![]()
51 Merc CT, what does the hexagon with "E" in the center refer to? Thanks.
|
![]() |
![]() |
![]() |
#10 | |
Senior Member
Join Date: May 2010
Location: East Hartford, Ct
Posts: 5,898
|
![]() Quote:
Could be the ID if the guy who stamped the date code, or anything you want it to be.
__________________
DON'T RECALL DOING SOMETHING FOR MYSELF BASED ON SOMEONE ELSE'S LIKES OR DISLIKES |
|
![]() |
![]() |
![]() |
#11 |
Senior Member
Join Date: Jun 2010
Location: San Antonio, Texas
Posts: 16,483
|
![]()
Unknown inspectors stamp. Inspector stamps would be used after the block cleared certain processes during the machining and assembly. No one alive to tell us much anymore.
|
![]() |
![]() |
![]() |
#12 |
Senior Member
Join Date: Jul 2017
Location: Eastern Oregon
Posts: 206
|
![]()
#5009 is the Serial Number found on the left front of the frame rail. #5011 is the data plate on the firewall. #5013 is the top of the block. #5014 shows two numbers, a "3" and a "2". #5015 shows what must be an inspector stamp in a diamond? #5016 show a "3". #5017 shows a "D".
|
![]() |
![]() |
![]() |
#13 |
Senior Member
Join Date: Jul 2017
Location: Eastern Oregon
Posts: 206
|
![]()
#5018 shows a "69" and "5594", which is the number on the reman tag from Tams Engineering. #5019 shows an "A" and maybe another "A". #5020 shows a "2" and a "6" or could be a "9". Underneath the "2" is the valve clearance setting, I assume, intake .014 and exhaust .018, looks like to me. #5021, valve settings. #5022 show either an "8" or a "3", hard to tell. #5023 shows a circle with "77" in it, a large "6" and a smaller "8", perhaps in an Octagon.
You guys are much more knowledgeable than I am at this stage, so there ya go. Doesn't make much sense to me. Thanks guys, hope I haven't confused you! |
![]() |
![]() |
![]() |
#14 |
Senior Member
Join Date: Jul 2017
Location: Eastern Oregon
Posts: 206
|
![]()
Uh, looks like the pictures didn't make it. Here ya go.
|
![]() |
![]() |
![]() |
#15 |
Senior Member
Join Date: Dec 2014
Location: Columbus, IN
Posts: 1,409
|
![]()
My 21 stud 1937 block has some of those random, individual numbers or letters stamped into the top surface. I think those are an inspector's mark, not really communicating anything most of us are interested in, like what day it was built or what vehicle was it installed in.
It looks like you have two broken head studs to contend with, at least they are sticking above the head surface. |
![]() |
![]() |
![]() |
#16 |
Senior Member
Join Date: Jul 2017
Location: Eastern Oregon
Posts: 206
|
![]()
Yup, seems like you always break a couple. Damn it!
|
![]() |
![]() |
![]() |
|
|
Sponsored Links (Register now to hide all advertisements) |
|