|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
03-31-2021, 11:19 PM | #1 |
Senior Member
Join Date: Apr 2018
Location: Mebane NC
Posts: 2,354
|
New videos: lower plate, more cylinder head prep
I've published a few more videos in the last couple of weeks.
A discussion of the lower distributor plate and some ways to reduce the risk of accidentally grounding it: https://youtu.be/nKZwX0klifI A discussion of cylinder head nut tightening sequences: https://youtu.be/m0KfanvVEgc Another video about the cylinder head installation process; this one goes from the preflight checklist to final pre-assembly and discusses some of the decision points along the way: https://youtu.be/MmFCFwWoiT8 I'll be recording one more video about actually putting the head on the block; it's coming up on four months since I started that project, so I'm excited to finally have the car back together again after replacing the valves, a valve seat, the carb, the head, and the plugs. After this I'm looking at a couple more video topics as time permits:
|
03-31-2021, 11:24 PM | #2 |
Senior Member
Join Date: Feb 2021
Location: Troutman, NC
Posts: 717
|
Re: New videos: lower plate, more cylinder head prep
Thanks for sharing
|
Sponsored Links (Register now to hide all advertisements) |
|
04-01-2021, 09:55 AM | #3 |
Senior Member
Join Date: Jul 2016
Location: Orangeville Illinois
Posts: 461
|
Re: New videos: lower plate, more cylinder head prep
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|